Pepperl+Fuchs OMT300-R200-IEP-IO-0,3M-V1 Distance sensor

Pepperl+Fuchs OMT300-R200-IEP-IO-0,3M-V1
Item Number: OMT300-R200-IEP-IO-0,3M-V1
  • Medium design with versatile mounting options
  • Space-saving distance sensors in small standardized design
  • Multi Pixel Technology (MPT) - exact and precise signal evaluation
  • IO-link interface for service and process data
  • Analog output 4 ... 20 mA
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Output type1 current output: 4 ... 20 mA
Control elementsTeach-In key
Housing depth41.7 mm
Min. cycle time3 ms
Reference targetstandard white, 100 mm x 100 mm
Repeat accuracy< 0.5 % , see table 1
Cable length0.3 m
Ripplemax. 10 %
Resolution0.1 mm
Load resistor> 1 kandOmega; voltage output ; 470 andOmega; current output
Transfer rateCOM 2 (38.4 kBaud)
Light typemodulated visible red light
Housing height50.6 mm
Degree of protectionIP67 / IP69 / IP69K
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Interface typeIO-Link ( via C/Q = pin 4 )
Warm up time5 min
Housing width15 mm
Usage categoryDC-12 and DC-13
Process data witdhProcess data input 4 byte
Process data output 2 bits
Voltage drop 1.5 V DC
Linearity error0.5 %
Product standardEN 60947-5-2
Mission Time (TM)20 a
Device profileIdentification and diagnosis
Smart Sensor type 0/type 3.3
LED risk group labellingexempt group
Switching currentmax. 100 mA , resistive load
Switching voltagemax. 30 V DC
Connection300 mm fixed cable with M12 x 1, 4-pin connector
IO-Link Revision1.1
Massapprox. 45 g
Ambient temperature10 ... 50 В°C (50 ... 122 В°F)
Temperature drift0.05 %/K
Diagnostic Coverage (DC)0 %
Operating voltage18 ... 30 V DC
Communication interfaceIEC 61131-9
Compatible master port typeA
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
I—Pin2: analog output 4...20 mA
Light sourceLED
Device ID0x111905 (1120517)
SIO mode supportyes
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Diameter of the light spotapprox. 8 mm at a distance of 300 mm
Response time2 ms , see table 1
MTTFd520 a
Control elements5-step rotary switch for operating modes selection
Protection classIII
Angle deviationmax. +/- 1.5 В°
CCC approvalCCC approval / marking not required for products rated 36 V
Ambient light limitEN 60947-5-2 : 45000 Lux
Signal output1 push-pull output , 1 analog output , short-circuit-proof, reverse polarity protection, surge-proof
No-load supply current< 25 mA at 24 V supply voltage
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Angle of divergence1.8 В°
Measurement range100 ... 300 mm

Comments

No comments yet

Write a comment

in international format without spaces
All fields are required