Pepperl+Fuchs OMT300-R200-IEP-IO-V1
Distance sensor
- Medium design with versatile mounting options
- Space-saving distance sensors in small standardized design
- Multi Pixel Technology (MPT) - exact and precise signal evaluation
- IO-link interface for service and process data
- Analog output 4 ... 20 mA
Item Number:
OMT300-R200-IEP-IO-V1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Load resistor | > 1 kandOmega; voltage output ; 470 andOmega; current output |
Diameter of the light spot | approx. 8 mm at a distance of 300 mm |
Protection class | III |
IO-Link Revision | 1.1 |
Switching current | max. 100 mA , resistive load |
Mission Time (TM) | 20 a |
Min. cycle time | 3 ms |
Light source | LED |
Usage category | DC-12 and DC-13 |
Function indicator | LED yellow: constantly on - switch output active constantly off - switch output inactive |
Connection | 4-pin, M12 x 1 connector, 90В° rotatable |
CCC approval | CCC approval / marking not required for products rated 36 V |
Control elements | 5-step rotary switch for operating modes selection |
Voltage drop | 1.5 V DC |
Product standard | EN 60947-5-2 |
Operating voltage | 18 ... 30 V DC |
Angle of divergence | 1.8 В° |
Housing depth | 41.7 mm |
SIO mode support | yes |
Switching type | The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link I—Pin2: analog output 4...20 mA |
Temperature drift | 0.05 %/K |
Signal output | 1 push-pull output , 1 analog output , short-circuit-proof, reverse polarity protection, surge-proof |
LED risk group labelling | exempt group |
Switching voltage | max. 30 V DC |
Control elements | Teach-In key |
Repeat accuracy | < 0.5 % , see table 1 |
Angle deviation | max. +/- 1.5 В° |
MTTFd | 520 a |
Reference target | standard white, 100 mm x 100 mm |
Process data witdh | Process data input 4 byte Process data output 2 bits |
Ambient light limit | EN 60947-5-2 : 45000 Lux |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Housing width | 15 mm |
Device ID | 0x111905 (1120517) |
Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Communication interface | IEC 61131-9 |
Mass | approx. 37 g |
Warm up time | 5 min |
Ripple | max. 10 % |
Degree of protection | IP67 / IP69 / IP69K |
Measurement range | 100 ... 300 mm |
Ambient temperature | 10 ... 50 В°C (50 ... 122 В°F) |
Compatible master port type | A |
Linearity error | 0.5 % |
Housing height | 50.6 mm |
Light type | modulated visible red light |
Interface type | IO-Link ( via C/Q = pin 4 ) |
No-load supply current | < 25 mA at 24 V supply voltage |
Device profile | Identification and diagnosis Smart Sensor type 0/type 3.3 |
Resolution | 0.1 mm |
Response time | 2 ms , see table 1 |
Transfer rate | COM 2 (38.4 kBaud) |
Diagnostic Coverage (DC) | 0 % |
Output type | 1 current output: 4 ... 20 mA |
People also buy
Comments
No comments yet