Pepperl+Fuchs OMT45-R103-2EP-IO-0,3M-V31-L
Distance sensor
- Miniature design with versatile mounting options
- Space-saving distance sensors in small standardized design
- Multi Pixel Technology (MPT) - exact and precise signal evaluation
- DuraBeam Laser Sensors - durable and employable like an LED
- IO-link interface for service and process data
Item Number:
OMT45-R103-2EP-IO-0,3M-V31-L
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Switching current | max. 100 mA , resistive load |
Interface type | IO-Link ( via C/Q = pin 4 ) |
Device profile | Smart Sensor |
Laser safety | EN 60825-1:2014 |
Angle deviation | max. +/- 1.5 В° |
Repeat accuracy | 0.15 mm |
Mass | approx. 17 g |
Process data witdh | Process data input 3 Byte Process data output 2 Bit |
Resolution | 0.01 mm |
Linearity error | В± 0.3 mm |
Control elements | Teach-In key |
Compatible master port type | A |
FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
Response time | 2 ms |
Angle of divergence | approx. 0.6 В° |
Connection | fixed cable 300 mm with M8 x 1 male connector; 4-pin |
Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
Device ID | 0x110908 (1116424) |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Diameter of the light spot | approx. 0.5 mm at a distance of 45 mm |
Voltage drop | 1.5 V DC |
Product standard | EN 60947-5-2 |
SIO mode support | yes |
Temperature drift | 20 Вµm/K |
No-load supply current | < 25 mA at 24 V supply voltage |
Cable length | 0.3 m |
Usage category | DC-12 and DC-13 |
Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Ripple | max. 10 % |
Switching voltage | max. 30 V DC |
Housing width | 15 mm |
Protection class | III |
Degree of protection | IP67 / IP69 / IP69K |
Control elements | 5-step rotary switch for operating modes selection |
Function indicator | LED yellow: constantly on - switch output active constantly off - switch output inactive |
Switching type | The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link Q2 - Pin2: NPN normally open, PNP normally closed |
Mission Time (TM) | 20 a |
Operating voltage | 10 ... 30 V DC |
Warm up time | 5 min |
Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Ambient light limit | EN 60947-5-2 : 30000 Lux |
MTTFd | 560 a |
Min. cycle time | 3 ms |
Diagnostic Coverage (DC) | 0 % |
IO-Link Revision | 1.1 |
Reference target | standard white, 100 mm x 100 mm |
Housing depth | 26.7 mm |
Light type | modulated visible red light |
Communication interface | IEC 61131-9 |
Ambient temperature | 10 ... 60 В°C (50 ... 140 В°F) , fixed cable 10 ... 60 В°C (50 ... 140 В°F) , movable cable not appropriate for conveyor chains |
Transfer rate | COM 2 (38.4 kBaud) |
Light source | laser diode |
Housing height | 36.5 mm |
Measurement range | 15 ... 45 mm |
People also buy
Comments
No comments yet