Pepperl+Fuchs OMT50-R101-2EP-IO-V31 Distance sensor

Pepperl+Fuchs OMT50-R101-2EP-IO-V31
Item Number: OMT50-R101-2EP-IO-V31
  • Miniature design with versatile mounting options
  • Space-saving distance sensors in small standardized design
  • Multi Pixel Technology (MPT) - exact and precise signal evaluation
  • IO-link interface for service and process data
Price on Request
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
No-load supply current< 25 mA at 24 V supply voltage
Temperature drift20 Вµm/K
Resolution0.01 mm
Switching currentmax. 100 mA , resistive load
Repeat accuracy 0.15 mm
Reference targetstandard white, 100 mm x 100 mm
Control elementsTeach-In key
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Transfer rateCOM 2 (38.4 kBaud)
Warm up time5 min
Housing width13.9 mm
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Measurement range20 ... 50 mm
Diagnostic Coverage (DC)0 %
Interface typeIO-Link ( via C/Q = pin 4 )
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 - Pin2: NPN normally open, PNP normally closed
Diameter of the light spotapprox. 4 mm at a distance of 50 mm
Massapprox. 10 g
ConnectionM8 x 1 connector, 4-pin
LED risk group labellingexempt group
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Housing depth18.3 mm
Response time2 ms
Usage categoryDC-12 and DC-13
Light sourceLED
Protection classIII
Angle deviationmax. +/- 1.5 В°
IO-Link Revision1.1
Communication interfaceIEC 61131-9
Housing height41.4 mm
SIO mode supportyes
Angle of divergence4 В°
Control elements5-step rotary switch for operating modes selection
Ambient light limitEN 60947-5-2 : 30000 Lux
Ambient temperature10 ... 60 В°C (50 ... 140 В°F)
Ripplemax. 10 %
Compatible master port typeA
Device profileSmart Sensor
Light typemodulated visible red light
Linearity errorВ± 0.3 mm
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Degree of protectionIP67 / IP69 / IP69K
Product standardEN 60947-5-2
MTTFd600 a
Switching voltagemax. 30 V DC
Device ID0x110901 (1116417)
Operating voltage10 ... 30 V DC
Min. cycle time3 ms
Voltage drop 1.5 V DC
Mission Time (TM)20 a
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Process data witdhProcess data input 3 Byte
Process data output 2 Bit


No comments yet

Write a comment

in international format without spaces
All fields are required