Pepperl+Fuchs OMT550-R200-2EP-IO-V1
Distance sensor
- Medium design with versatile mounting options
- Space-saving distance sensors in small standardized design
- Multi Pixel Technology (MPT) - exact and precise signal evaluation
- IO-link interface for service and process data
Item Number:
OMT550-R200-2EP-IO-V1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Control elements | Teach-In key |
Switching type | The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link Q2 - Pin2: NPN normally open, PNP normally closed |
Transfer rate | COM 2 (38.4 kBaud) |
Repeat accuracy | 1 % , see table 1 |
Housing width | 15 mm |
MTTFd | 600 a |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Operating voltage | 10 ... 30 V DC |
SIO mode support | yes |
Temperature drift | 0.05 %/K |
Ripple | max. 10 % |
IO-Link Revision | 1.1 |
Connection | 4-pin, M12 x 1 connector, 90В° rotatable |
Angle deviation | max. +/- 1.5 В° |
Usage category | DC-12 and DC-13 |
Protection class | III |
Compatible master port type | A |
Diagnostic Coverage (DC) | 0 % |
Warm up time | 5 min |
Communication interface | IEC 61131-9 |
Product standard | EN 60947-5-2 |
Switching current | max. 100 mA , resistive load |
Function indicator | LED yellow: constantly on - switch output active constantly off - switch output inactive |
Angle of divergence | 2.5 В° |
Min. cycle time | 3 ms |
Device ID | 0x111901 (1120513) |
Light type | modulated visible red light |
Housing height | 50.6 mm |
Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Mass | approx. 37 g |
Process data witdh | Process data input 4 byte Process data output 2 bits |
Switching voltage | max. 30 V DC |
Mission Time (TM) | 20 a |
Control elements | 5-step rotary switch for operating modes selection |
Housing depth | 41.7 mm |
Measurement range | 100 ... 550 mm |
Diameter of the light spot | approx. 20 mm at a distance of 550 mm |
Linearity error | 0.75 % |
Resolution | 0.1 mm |
Ambient light limit | EN 60947-5-2 : 45000 Lux |
Interface type | IO-Link ( via C/Q = pin 4 ) |
Response time | 2 ms , see table 1 |
Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
Reference target | standard white, 100 mm x 100 mm |
Ambient temperature | 10 ... 60 В°C (50 ... 140 В°F) |
Voltage drop | 1.5 V DC |
Device profile | Identification and diagnosis Smart Sensor type 0/type 3.3 |
CCC approval | CCC approval / marking not required for products rated 36 V |
No-load supply current | < 25 mA at 24 V supply voltage |
Light source | LED |
Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Degree of protection | IP67 / IP69 / IP69K |
LED risk group labelling | exempt group |
People also buy
Comments
No comments yet