Pepperl+Fuchs OMT550-R200-IEP-IO-V1
Distance sensor
We ship to United States of America!
- Medium design with versatile mounting options
- Space-saving distance sensors in small standardized design
- Multi Pixel Technology (MPT) - exact and precise signal evaluation
- IO-link interface for service and process data
- Analog output 4 ... 20 mA
Item Number:
OMT550-R200-IEP-IO-V1
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
- Overview +
- Comments +
| Angle of divergence | 2.5 ?° |
| Transfer rate | COM 2 (38.4 kBaud) |
| Min. cycle time | 3 ms |
| Control elements | 5-step rotary switch for operating modes selection |
| Mass | approx. 37 g |
| Communication interface | IEC 61131-9 |
| Mission Time (TM) | 20 a |
| MTTFd | 520 a |
| Switching voltage | max. 30 V DC |
| Reference target | standard white, 100 mm x 100 mm |
| Device profile | Identification and diagnosis Smart Sensor type 0/type 3.3 |
| Ripple | max. 10 % |
| Signal output | 1 push-pull output , 1 analog output , short-circuit-proof, reverse polarity protection, surge-proof |
| Connection | 4-pin, M12 x 1 connector, 90?° rotatable |
| Housing height | 50.6 mm |
| Housing width | 15 mm |
| Linearity error | 0.75 % |
| Warm up time | 5 min |
| Housing depth | 41.7 mm |
| Temperature drift | 0.05 %/K |
| Response time | 2 ms , see table 1 |
| Voltage drop | 1.5 V DC |
| Protection class | III |
| Degree of protection | IP67 / IP69 / IP69K |
| Usage category | DC-12 and DC-13 |
| Angle deviation | max. +/- 1.5 ?° |
| SIO mode support | yes |
| Switching type | The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link I??”Pin2: analog output 4...20 mA |
| Operating voltage | 18 ... 30 V DC |
| Device ID | 0x111902 (1120514) |
| IO-Link Revision | 1.1 |
| Diagnostic Coverage (DC) | 0 % |
| No-load supply current | < 25 mA at 24 V supply voltage |
| Product standard | EN 60947-5-2 |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Ambient temperature | 10 ... 50 ?°C (50 ... 122 ?°F) |
| Compatible master port type | A |
| Switching current | max. 100 mA , resistive load |
| Light source | LED |
| Measurement range | 100 ... 550 mm |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Storage temperature | -40 ... 70 ?°C (-40 ... 158 ?°F) |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Resolution | 0.1 mm |
| Ambient light limit | EN 60947-5-2 : 45000 Lux |
| Output type | 1 current output: 4 ... 20 mA |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Function indicator | LED yellow: constantly on - switch output active constantly off - switch output inactive |
| Diameter of the light spot | approx. 20 mm at a distance of 550 mm |
| Control elements | Teach-In key |
| Repeat accuracy | 1 % , see table 1 |
| Light type | modulated visible red light |
| LED risk group labelling | exempt group |
| Process data witdh | Process data input 4 byte Process data output 2 bits |
| Load resistor | > 1 kandOmega; voltage output ; 470 andOmega; current output |
Buy Pepperl+Fuchs OMT550-R200-IEP-IO-V1 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. offers factory automation products. We offer a comprehensive range of reliable and high-efficiency products. For your convenience, we can arrange express delivery worldwide. Guaranteed quality with the minimum possible prices. You will get your order fast and with good prices. We are focused on long-term cooperation and mutual benefit.
Comments
No comments yet