Pepperl+Fuchs OMT550-R201-2EP-IO Distance sensor

Pepperl+Fuchs OMT550-R201-2EP-IO
Item Number: OMT550-R201-2EP-IO
  • Medium design with versatile mounting options
  • Space-saving distance sensors in small standardized design
  • Multi Pixel Technology (MPT) - exact and precise signal evaluation
  • IO-link interface for service and process data
Price on Request
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Ripplemax. 10 %
Diameter of the light spotapprox. 20 mm at a distance of 550 mm
Operating voltage10 ... 30 V DC
LED risk group labellingexempt group
Device profileIdentification and diagnosis
Smart Sensor type 0/type 3.3
Transfer rateCOM 2 (38.4 kBaud)
Usage categoryDC-12 and DC-13
Housing height61.7 mm
Ambient light limitEN 60947-5-2 : 45000 Lux
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
MTTFd600 a
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Repeat accuracy 1 % , see table 1
Cable length2 m
Protection classIII
Min. cycle time3 ms
Reference targetstandard white, 100 mm x 100 mm
SIO mode supportyes
Process data witdhProcess data input 4 byte
Process data output 2 bits
Mission Time (TM)20 a
Linearity error0.75 %
Control elementsTeach-In key
Voltage drop 1.5 V DC
No-load supply current< 25 mA at 24 V supply voltage
Angle of divergence2.5 В°
Light sourceLED
Diagnostic Coverage (DC)0 %
Control elements5-step rotary switch for operating modes selection
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Device ID0x111911 (1120529)
Switching currentmax. 100 mA , resistive load
Interface typeIO-Link ( via C/Q = pin 4 )
Angle deviationmax. +/- 1.5 В°
Communication interfaceIEC 61131-9
Compatible master port typeA
Measurement range100 ... 550 mm
CCC approvalCCC approval / marking not required for products rated 36 V
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Switching typeThe default setting is:
C/Q - BK: NPN normally open, PNP normally closed, IO-Link
Q2 - WH: NPN normally open, PNP normally closed
Response time2 ms , see table 1
Massapprox. 73 g
Connection2 m fixed cable
Ambient temperature10 ... 60 В°C (50 ... 140 В°F)
Light typemodulated visible red light
Housing width15 mm
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Resolution0.1 mm
Warm up time5 min
Temperature drift0.05 %/K
Product standardEN 60947-5-2
Switching voltagemax. 30 V DC
IO-Link Revision1.1
Degree of protectionIP67 / IP69 / IP69K
Housing depth41.7 mm


No comments yet

Write a comment

in international format without spaces
All fields are required