Pepperl+Fuchs OMT550-R201-IEP-IO-V1
Distance sensor
- Medium design with versatile mounting options
- Space-saving distance sensors in small standardized design
- Multi Pixel Technology (MPT) - exact and precise signal evaluation
- IO-link interface for service and process data
- Analog output 4 ... 20 mA
Item Number:
OMT550-R201-IEP-IO-V1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Device ID | 0x111912 (1120530) |
| Housing width | 15 mm |
| Control elements | Teach-In key |
| Ripple | max. 10 % |
| Switching current | max. 100 mA , resistive load |
| Reference target | standard white, 100 mm x 100 mm |
| Device profile | Identification and diagnosis Smart Sensor type 0/type 3.3 |
| Communication interface | IEC 61131-9 |
| Linearity error | 0.75 % |
| Compatible master port type | A |
| IO-Link Revision | 1.1 |
| Switching voltage | max. 30 V DC |
| Usage category | DC-12 and DC-13 |
| Measurement range | 100 ... 550 mm |
| Output type | 1 current output: 4 ... 20 mA |
| Housing depth | 41.7 mm |
| Protection class | III |
| Temperature drift | 0.05 %/K |
| Diameter of the light spot | approx. 20 mm at a distance of 550 mm |
| Resolution | 0.1 mm |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| LED risk group labelling | exempt group |
| Min. cycle time | 3 ms |
| Signal output | 1 push-pull output , 1 analog output , short-circuit-proof, reverse polarity protection, surge-proof |
| Ambient temperature | 10 ... 50 В°C (50 ... 122 В°F) |
| Degree of protection | IP67 / IP69 / IP69K |
| Operating voltage | 18 ... 30 V DC |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| No-load supply current | < 25 mA at 24 V supply voltage |
| Angle deviation | max. +/- 1.5 В° |
| Switching type | The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link I—Pin2: analog output 4...20 mA |
| Voltage drop | 1.5 V DC |
| Angle of divergence | 2.5 В° |
| Warm up time | 5 min |
| Control elements | 5-step rotary switch for operating modes selection |
| Function indicator | LED yellow: constantly on - switch output active constantly off - switch output inactive |
| MTTFd | 520 a |
| Repeat accuracy | 1 % , see table 1 |
| Diagnostic Coverage (DC) | 0 % |
| Transfer rate | COM 2 (38.4 kBaud) |
| Housing height | 61.7 mm |
| Load resistor | > 1 kandOmega; voltage output ; 470 andOmega; current output |
| Light source | LED |
| Mission Time (TM) | 20 a |
| Ambient light limit | EN 60947-5-2 : 45000 Lux |
| Response time | 2 ms , see table 1 |
| SIO mode support | yes |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Product standard | EN 60947-5-2 |
| Light type | modulated visible red light |
| Process data witdh | Process data input 4 byte Process data output 2 bits |
| Connection | 4-pin, M12 x 1 connector, 90В° rotatable |
| Mass | approx. 37 g |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
Comments
No comments yet