Pepperl+Fuchs OPC120W-F200-R2-Ex
Stationary read device
- Explosion-proof housing
- Reads 1-D and 2-D codes at high speeds of up to 6 m/s at 30 readings/s
- High depth of focus
- Code quality index output
- Logo comparison
- Presence detection
Item Number:
OPC120W-F200-R2-Ex
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Read distance | 60 ... 160 mm Nominal distance: 120 mm |
| Enclosure cover | threaded round cover |
| Cable length | max. 30 m |
| Transfer rate | 100 MBit/s |
| Cover seal | none, O-ring for IP66/67 |
| Number/Type | GOOD, BAD, Matchcode |
| Switching type | PNP |
| Number/Type | Trigger |
| Evaluation frequency | up to 30 Hz |
| Flamepath grease | petroleum jelly |
| IECEx approval | IECEx INE 14.0042X |
| MTTFd | 40.5 a |
| Operating voltage | 24 V DC В± 15% , PELV |
| Interface type | serial , RS 232 |
| Cable length | max. 30 m |
| Protocol | TCP/IP |
| Cable length | max. 30 m |
| Transfer rate | max. 115.2 kBit/s |
| Interface type | Ethernet |
| Connection type | Connection terminals, max. conductor cross-section 2.5 mm2 |
| Cover fixing | flamepath thread |
| Symbologies | Data Matrix, Code 39, Code 128, Int 2 of 5, EAN13, Pharmacode |
| Mission Time (TM) | 8 a |
| Switching threshold | low: < 10 V, high: > 15 V |
| Modul size | Minimum module size: 0.3 mm |
| Cable length | max. 30 m |
| Target velocity | triggered max. 6 m/s |
| Diagnostic Coverage (DC) | 0 % |
| Input voltage | to be applied externally 24 V В± 15% PELV |
| Mass | approx. 7 kg |
| Switching voltage | to be applied externally 24 V В± 15 % PELV |
| Reading field | Minimum read field: 28 mm x 45 mm Read field at nominal distance: 44 mm x 70 mm Maximum read field: 60 mm x 95 mm |
| ATEX approval | INERIS 14 ATEX 0035X |
| Ambient temperature | 0 ... 37 В°C (32 ... 98.6 В°F) |
| Operation indicator | LED green: Ready for operation |
| Grounding | M6 external grounding points |
| No-load supply current | max. 250 mA |
| Degree of protection | IP66 (IP66/67 with O-ring) |
| Switching current | 100 mA each output |
| LED indication | for good/poor reading |
| Light type | Integrated LED lightning (white) |
| Input current | approx. 10 mA at 24 V DC |
| Power consumption | 6 W |
Comments
No comments yet