Pepperl+Fuchs OQT120-R103-2EP-IO-0,3M-V1 Triangulation sensor (SbR)


Item Number: OQT120-R103-2EP-IO-0,3M-V1
- Miniature design with versatile mounting options
- Multi Pixel Technology (MPT) - flexibility and adaptability
- Reduction of device variety - several switch points within one sensor
- Reliable detection of all surfaces, independent of color and structure
- Low sensitivity to target color
- IO-link interface for service and process data
- Overview
- Datasheet
- Alternative numbers
- Comments
No-load supply current | < 25 mA at 24 V supply voltage |
Housing depth | 26.7 mm |
IO-Link Revision | 1.1 |
Compatible master port type | A |
Detection range | 5 ... 120 mm |
Housing height | 36.5 mm |
Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Protection class | III |
SIO mode support | yes |
Angle of divergence | approx. 4 В° |
Reference target | standard white, 100 mm x 100 mm |
Detection range max. | 5 ... 120 mm |
Connection | 300 mm fixed cable with M12 x 1, 4-pin connector |
Switching frequency | 217 Hz |
Function indicator | LED yellow: constantly on - switch output active constantly off - switch output inactive |
LED risk group labelling | exempt group |
Diameter of the light spot | approx. 8 mm at a distance of 120 mm |
Voltage drop | 1.5 V DC |
Process data witdh | Process data input 2 Bit Process data output 2 Bit |
Min. cycle time | 2.3 ms |
Product standard | EN 60947-5-2 |
Ambient light limit | EN 60947-5-2 : 30000 Lux |
Device ID | 0x110803 (1116163) |
Control elements | 5-step rotary switch for operating modes selection |
Housing width | 15 mm |
Light source | LED |
Transfer rate | COM 2 (38.4 kBaud) |
Degree of protection | IP67 / IP69 / IP69K |
Switching current | max. 100 mA , resistive load |
MTTFd | 600 a |
Response time | 2.3 ms |
Diagnostic Coverage (DC) | 0 % |
Control elements | Teach-In key |
Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) , fixed cable -25 ... 60 В°C (-13 ... 140 В°F) , movable cable not appropriate for conveyor chains |
Black/White difference (6 %/90 %) | < 5 % at 120 mm |
Mission Time (TM) | 20 a |
Operating voltage | 10 ... 30 V DC |
Adjustment range | 20 ... 120 mm |
Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Communication interface | IEC 61131-9 |
Light type | modulated visible red light |
Mass | approx. 23 g |
Interface type | IO-Link ( via C/Q = pin 4 ) |
Usage category | DC-12 and DC-13 |
Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
Device profile | Smart Sensor |
Detection range min. | 5 ... 20 mm |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Switching voltage | max. 30 V DC |
Cable length | 0.3 m |
Ripple | max. 10 % |
Switching type | The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link Q2 - Pin2: NPN normally open, PNP normally closed |
People also buy
Comments
No comments yet