Pepperl+Fuchs OQT150-R100-2EP-IO-V31 Triangulation sensor (SbR)
Item Number: OQT150-R100-2EP-IO-V31
- Miniature design with versatile mounting options
- Multi Pixel Technology (MPT) - flexibility and adaptability
- Reduction of device variety - several switch points within one sensor
- Reliable detection of all surfaces, independent of color and structure
- Low sensitivity to target color
- IO-link interface for service and process data
- Overview
- Datasheet
- Alternative numbers
- Comments
| Connection | M8 x 1 connector, 4-pin |
| Product standard | EN 60947-5-2 |
| Compatible master port type | A |
| Reference target | standard white, 100 mm x 100 mm |
| Degree of protection | IP67 / IP69 / IP69K |
| SIO mode support | yes |
| Housing depth | 21.5 mm |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Min. cycle time | 2.3 ms |
| Device ID | 0x110801 (1116161) |
| Process data witdh | Process data input 2 Bit Process data output 2 Bit |
| Detection range max. | 5 ... 150 mm |
| IO-Link Revision | 1.1 |
| Mass | approx. 10 g |
| Diagnostic Coverage (DC) | 0 % |
| Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) |
| Ripple | max. 10 % |
| MTTFd | 600 a |
| Function indicator | LED yellow: constantly on - switch output active constantly off - switch output inactive |
| Control elements | Teach-In key |
| Response time | 2.3 ms |
| Switching current | max. 100 mA , resistive load |
| Light type | modulated visible red light |
| Control elements | 5-step rotary switch for operating modes selection |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Switching voltage | max. 30 V DC |
| Communication interface | IEC 61131-9 |
| Protection class | III |
| Switching frequency | 217 Hz |
| Detection range | 5 ... 150 mm |
| LED risk group labelling | exempt group |
| Voltage drop | 1.5 V DC |
| Adjustment range | 20 ... 150 mm |
| Angle of divergence | approx. 4 В° |
| Black/White difference (6 %/90 %) | < 5 % at 150 mm |
| Housing height | 44.5 mm |
| Diameter of the light spot | approx. 10 mm at a distance of 150 mm |
| Usage category | DC-12 and DC-13 |
| No-load supply current | < 25 mA at 24 V supply voltage |
| Detection range min. | 5 ... 20 mm |
| Housing width | 11 mm |
| Mission Time (TM) | 20 a |
| Device profile | Smart Sensor |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Operating voltage | 10 ... 30 V DC |
| Light source | LED |
| Transfer rate | COM 2 (38.4 kBaud) |
| Switching type | The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link Q2 - Pin2: NPN normally open, PNP normally closed |
Comments
No comments yet