Pepperl+Fuchs PCV80-F200-R4-V15-LS221
Optical reading head
- RS 485 interface
- Non-contact positioning on Data Matrix code tape
- Mechanically rugged: no wearing parts, long operating life, maintenance-free
- High resolution and precise positioning, especially for facilities with curves and switch points as well as inclines and declines.
- Travel ranges up to 524 m
Item Number:
PCV80-F200-R4-V15-LS221
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Degree of protection | IP67 |
| Output type | 1 switch output PNP , programmable , short-circuit protected |
| Input impedance | 27 kandOmega; |
| Mission Time (TM) | 54 a |
| Storage temperature | -20 ... 85 В°C (-4 ... 185 В°F) |
| Read distance | 80 mm |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Housing width | 70 mm |
| Switching voltage | Operating voltage |
| Relative humidity | 90 % , noncondensing |
| Protocol | WCS...B-LS221 |
| Interface type | RS 485 interface |
| Operating voltage | 15 ... 30 V DC , PELV |
| MTTFd | 108 a |
| Power consumption | 3 W |
| Data output code | binary code |
| Shock resistance | EN 60068-2-27:2009 |
| Connection type | 5-pin, M12 x 1 connector |
| Light type | Integrated LED lightning (red) |
| Reading field | 40 mm x 25 mm |
| Noise immunity | EN 61000-6-2:2005 |
| Measuring range | max. 524 m |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure |
| Resolution | В± 1 mm |
| Emitted interference | EN 61000-6-4:2007+A1:2011 |
| No-load supply current | max. 200 mA |
| Housing height | 70 mm |
| Operating temperature | 0 ... 60 В°C (32 ... 140 В°F) , -20 ... 60 В°C (-4 ... 140 В°F) (noncondensing; prevent icing on the lens!) |
| Diagnostic Coverage (DC) | 0 % |
| Mass | approx. 160 g |
| Termination | Switchable terminal resistor |
| Transfer rate | 62500 Bit/s |
| Passage speed | 12.5 m/s |
| Input type | 1 funtion input 0-level: -UBor unwired 1-level: +8 V ... +UB , programmable |
| Vibration resistance | EN 60068-2-6:2008 |
| Switching current | 150 mA each output |
| LED indicator | 7 LEDs (communication, alignment aid, status information) |
Comments
No comments yet