Pepperl+Fuchs PMI120-F90-3EP-IO-V15
Inductive positioning system
- Parameterization and diagnosis via IO-Link
- Measuring range 0 ... 120 mm
- Parameterisable measuring range
- 3 Push-pull outputs
- Switch points programmable via IO-Link
- Overview
- Comments
| Interface type | IO-Link (via C/Q = Pin 4) |
| LED STATUS | Status display LED, green/red (Power on, communication/error, missing damping element) |
| No-load supply current | 40 mA |
| Resolution | 50 andmicro;m |
| LED S1 | switching state Switching output 1 |
| IO-Link Revision | 1.1 |
| Diagnostic Coverage (DC) | 0 % |
| Short-circuit protection | pulsing |
| Connection type | 5-pin, M12 x 1 connector |
| Measurement range | 0 ... 120 mm |
| Device profile | Smart Sensor |
| Switching window | В± 1 mm |
| LED S2 | switching state Switching output 2 |
| Process data witdh | Process data input: 16 Bit Process data output: none |
| LED S3 | switching state, Switching output 3 |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| Operating current | 100 mA / output |
| Mass | 113 g |
| Device ID | 0x200402 (2098178) |
| Temperature drift | В± 0.5 mm (-25 В°C ... 70 В°C) |
| Voltage drop | 3 V |
| Min. cycle time | 2.3 ms |
| Linearity error | within measuring range: В± 0.8 mm within linearity range: В± 0.4 mm |
| Transfer rate | COM 2 (38.4 kBaud) |
| SIO mode support | yes |
| Switching hysteresis | 0.2 mm |
| Repeat accuracy | В± 0.1 mm |
| Value range | 0000h ... 9600h |
| Compatible master port type | A |
| Reverse polarity protection | reverse polarity protected |
| Object distance | 0.5 ... 3 mm , recommended: 1.5 mm |
| Linearity range | 1 ... 119 mm |
| Degree of protection | IP67 / IP69K |
| Operating voltage | 12 ... 30 V DC |
| Output type | 3 push-pull outputs (can be parameterized), short-circuit-proof, reverse polarity protection , overvoltage protected |
| MTTFd | 271 a |
| Ambient temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Mission Time (TM) | 20 a |
| Operating voltage indicator | LED green |
| Switching element function | 3 switch outputs, programmable |
Comments
No comments yet