Pepperl+Fuchs PS1000-A6-24.10
Power Supply
We ship
to United States of America
- 100 V AC to 240 V AC wide-range input
- Output 24 V DC, 10 A, 240 W, 1-phase
- Housing width 39 mm
- Efficiency up to 95.2 %
- Minimal inrush current surge
- DC OK relay contact
- Suitable for Zone 2/Div. 2 mounting
Item Number:
PS1000-A6-24.10
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
| Efficiency | 93.6 % at 120 V AC 95.2 % at 230 V AC | |
| Power dissipation | 16.4 W at 120 V AC 12.1 W at 230 V AC | |
| Voltage range | 100 ... 240 V AC (-15 %/+10 %), 50 ... 60 Hz (?±6 %) 110 ... 150 V DC (?±20 %) | |
| Current | 2.15 A at 120 V AC 1.13 A at 230 V AC 2.35 A at 110 V DC for lower output currents see technical information | |
| Inrush current | 6 A peak at 120 V AC and ambient temperature 40 ?°C (104 ?°F) 9 A peak at 230 V AC and ambient temperature 40 ?°C (104 ?°F) | |
| Capacity factor | 0.99 at 120 V AC 0.97 at 230 V AC | |
| Rated voltage | 24 V DC | |
| Voltage range | 24 ... 28 V DC factory setting: 24.1 V | |
| Rated current | 10 A | |
| Current | 12 ... 10.3 A at ambient temperature < 45 ?°C (113 ?°F) 10 ... 8.6 A at ambient temperature 60 ?°C (140 ?°F) 7.5 ... 6.5 A at ambient temperature 70 ?°C (158 ?°F) linear power derating see technical information | |
| Power | 240 W | |
| Ripple | max. 50 mV pp | |
| Hold-up time | 37 ms at 120 V AC 37 ms at 230 V AC | |
| Overload behavior | continuous current at output voltage > 13 V DC Hiccup behaviour at output voltage < 13 V DC | |
| Short-circuit current | typ. 30.5 A for up to 12 ms, load impedance < 45 mΩ max. 5 Arms average continuous current, load impedance 50 mΩ | |
| Voltage limitation | typ. 30.5 V DC max. 32 V DC | |
| Connection | terminals 13, 14 | |
| Output type | relay contact DC OK - contact is closed if the output voltage is > 90 % of the adjusted output voltage | |
| Contact loading | max. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load min. 1 mA at 5 V DC | |
| Input/Output | SELV/PELV | |
| Display elements | LED green: status DC OK - LED lights up if the output voltage is > 90 % of the adjusted output voltage | |
| Control elements | potentiometer | |
| Configuration | setting of the output voltage via potentiometer | |
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | IEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4 , IEC/EN 61000-3-2 , IEC/EN 61000-3-3 | |
| Low voltage | ||
| Directive 2014/35/EU | EN 61010-1 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | IEC/EN 63000:2019 | |
| Degree of protection | EN 60529 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Ambient temperature | -25 ... 70 ?°C (-13 ... 158 ?°F) , see technical information | |
| Storage temperature | -40 ... 85 ?°C (-40 ... 185 ?°F) | |
| Relative humidity | 5 ... 95 %, noncondensing | |
| Shock resistance | 20 g , 11 ms or 30 g , 6 ms | |
| Vibration resistance | 2 ... 17.8 Hz : ?± 1.6 mm , 17.8 ... 500 Hz : 2 g | |
| Housing material | aluminum alloy , galvanized steel | |
| Degree of protection | IP20 | |
| Connection | ||
| Input/Output | screw terminals conductor cross section: max. 6 mm2 (AWG 20-10) cable diameter: max. 2.8 mm, wire end ferrules included stripped insulation length: 7 mm tightening torque: max. 1 Nm | |
| Relay contact output | spring terminals with push-in connection technology conductor cross section: max. 1.5 mm2 (AWG 24-16) cable diameter: max. 1.6 mm, wire end ferrules included stripped insulation length: 7 mm | |
| Mass | approx. 600 g | |
| Dimensions | 39 x 124 x 117 mm (W x H x D) , without DIN mounting rail | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| ATEX approval | ||
| ATEX certificate | EPS 15 ATEX 1101 X | |
| ATEX marking | II 3G Ex ec nC II T4 Gc | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-7:2015+A1:2018 , EN 60079-15:2010 | |
| UL approval | E350173 , E223176 | |
| IECEx approval | ||
| IECEx certificate | IECEx EPS 20.0055X | |
| IECEx marking | Ex ec nC IIC T4 Gc | |
| Standards | IEC 60079-0:2017 , IEC 60079-7:2017 , IEC 60079-15:2017 | |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
| ECLASS 13.0 | 19209090 | |
| ECLASS 12.0 | 19209290 | |
| ECLASS 11.0 | 19209290 | |
| ECLASS 10.0.1 | 19209290 | |
| ECLASS 9.0 | 19209290 | |
| ECLASS 8.0 | 19209290 | |
| ECLASS 5.1 | 27242392 | |
| ETIM 9.0 | EC002542 | |
| ETIM 8.0 | EC002542 | |
| ETIM 7.0 | EC002542 | |
| ETIM 6.0 | EC002542 | |
| ETIM 5.0 | EC002542 | |
| UNSPSC 12.1 | 39121004 | |
Buy Pepperl+Fuchs PS1000-A6-24.10 with the best possible price and delivery terms on eltra-trade.com
eltra-trade.com offers a wide range of industrial electrical products. We specialize in sourcing hard-to-find parts and providing timely delivery. Our commitment to quality and competitive pricing makes us a preferred supplier. Partner with us for your electrical supply needs and enjoy exceptional service.
Comments
No comments yet