Pepperl+Fuchs PVM58N-YY1AGR0BN-1213
Multiturn absolute encoder
- Industrial standard housing &empty-58 mm
- PROFIBUS interface
- 25-bit multiturn
- Speed transfer
- Extended scaling functions
- Programmable limit switches
- Commissioning mode
- Clamping flange
Item Number:
PVM58N-YY1AGR0BN-1213
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Datasheet
- Alternative numbers
- Comments
| Transfer rate | 0.0096 ... 12 MBit/s |
| Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms |
| Interface type | PROFIBUS |
| Mass | approx. 600 g |
| No-load supply current | max. 230 mA at 10 V DC max. 100 mA at 24 V DC |
| Starting torque | ≤ 3 Ncm (version without shaft seal) |
| Time delay before availability | < 1000 ms |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Terminal compartment | in removable housing cover |
| Diagnostic Coverage (DC) | 0 % |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 1000 Hz |
| Code course (counting direction) | programmable, cw ascending (clockwise rotation, code course ascending) cw descending (clockwise rotation, code course descending) |
| Noise immunity | EN 61000-6-2:2005 |
| Climatic testing | DIN EN 60068-2-30 , no moisture condensation |
| Emitted interference | EN 61000-6-4:2007 |
| Mission Time (TM) | 20 a |
| Operating temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Linearity | В± 1 LSB at 13 Bit , В± 0.5 LSB at 12 Bit |
| Rotational speed | max. 12000 min -1 |
| Material | housing: powder coated aluminum flange: aluminum shaft: stainless steel |
| Moment of inertia | 30 gcm2 |
| Degree of protection | DIN EN 60529, IP65 |
| Device type | Multiturn absolute encoder |
| Operating voltage | 10 ... 30 V DC |
| Detection type | photoelectric sampling |
| Output code | binary code |
| L10 | 1.9 E+11 at 6000 rpm and 20/40 N axial/radial shaft load |
| MTTFd | 70 a |
| Power consumption | max. 2.5 W |
| Standard conformity | PNO profile 3.062, RS-485 |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Comments
No comments yet