Pepperl+Fuchs R8D0-MIO-Ex12.PA*
Multi-Input/Output Device for Cabinet Installation
- For discrete inputs and outputs
- Installation in Zone 1/Div. 1, intrinsically safe
- Sensors in Zone 0/Div. 1
- Connection to fieldbus acc. to FISCO or Entity
- For PROFIBUS PA
- DCS integration via GSD and FDT/DTM
- Monitors sensor condition
- Removable terminals
- Power, Com, Diagnostics, and Error LEDs
- Test points for easy troubleshooting
Item Number:
R8D0-MIO-Ex12.PA*
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Supply voltage | 6.6 V |
| Degree of protection | IP20 |
| LED COM ERR | red, continuous lightning: hardware error; red, flashing: no bus activities or bus fault; off: no error |
| IECEx approval | IECEx BVS 16.0051X |
| Number of outputs | 4 |
| Input type | Frequency input / Counter Input , channel 1 |
| EU-Type Examination Certificate | BVS 16 ATEX E 075 X |
| Supply voltage | 5 V |
| Number of inputs | 1 |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| LED CHANNEL ERROR | red, flashing: lead breakage/short circuit; off: no error |
| Galvanic isolation | EN 60079-11 |
| Mounting | mounting on DIN rail in cabinet |
| Electromagnetic compatibility | NE 21:2011 |
| Vibration resistance | 5 g , 10 ... 150 Hz |
| DIP switch | Address setting , write protection , simulation |
| Rated voltage | 9 ... 32 V |
| Degree of protection | IEC/EN 60529 |
| Switching frequency | min. 0.1 Hz max. 5 kHz |
| Polarity | not polarity sensitive |
| Fieldbus standard | IEC 61158-2 |
| Relative humidity | 95 % non-condensing |
| Fieldbus type | PROFIBUS PA |
| Number of inputs | 12 |
| LED PWR | green: on, bus voltage existent |
| Connection type | plug-in terminals , spring terminal and screw terminal |
| Ambient temperature | -50 ... 75 В°C (-58 ... 167 В°F) hazardous area -50 ... 85 В°C (-58 ... 185 В°F) safe area |
| Pollution degree | 2 |
| Vibration resistance | EN 60068-2-6 |
| Supply current | 5 mA |
| Supply current | 1.5 mA |
| Marine approval | pending |
| Foundation Fieldbus/Field circuit | safe galvanic isolation acc. to EN 60079-11, voltage peak value 375 V |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
| Mass | approx. 290 g |
| Line fault detection | lead breakage , short circuit (not in counter mode) |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| Line fault detection | lead breakage , short circuit |
| Output type | Low power valve , channels 1, 4, 7, 10 |
| Input type | Sensor input , channels 1, 4, 7, 10 multiplexed , cycle adjustable |
| Design / Mounting | Cabinet installation |
| FDE (Fault Disconnect Equipment) | 6.7 mA |
| Input type | Sensor input , channels 2, 3, 5, 6, 8, 9, 11, 12 multiplexed , cycle fixed |
| Shock resistance | EN 60068-2-27 |
| Housing material | Polycarbonate |
| Pulse duration | min. 80 micro/s |
| Rated current | max. 23 mA |
| Shock resistance | 15 g , 11 ms |
Comments
No comments yet