Pepperl+Fuchs RLK28-55-1518
Retroreflective sensor
- Ultra bright LEDs for power on, weak signal indication and switching state
- Not sensitive to ambient light, even with switched energy saving lamps
- Waterproof, degree of protection IP67
- Protection class II
Item Number:
RLK28-55-1518
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Reflector distance | 0.05 ... 17 m |
| Housing height | 88 mm |
| Operating voltage | 12 ... 240 V AC/DC |
| Light source | LED |
| Response time | 20 ms |
| Angle of divergence | emitter 1.2В° receiver 2В° |
| Housing width | 25.8 mm |
| Reference target | H85-2 reflector |
| Light type | modulated visible red light , 660 nm |
| Degree of protection | IP67 |
| Protection class | II, rated insulation voltage 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit insulated from control circuit in accordance with IEC 61140. Caution! The protection class 2 is only valid when the terminal compartment is closed. |
| Threshold detection range | 21 m |
| Diameter of the light spot | approx. 290 mm at a distance of 17 m |
| Polarization filter | yes |
| Mission Time (TM) | 20 a |
| Mass | 112 g |
| Connection | connector M18, 4-pin |
| Power consumption | 3.5 VA |
| Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) |
| Function indicator | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted |
| MTTFd | 600 a |
| Switching type | light/dark on switchable |
| Operation indicator | LED green |
| Switching frequency | 25 Hz |
| Product standard | EN 60947-5-2 |
| Diagnostic Coverage (DC) | 0 % |
| Switching power | DC: max. 50 W AC: max. 500 VA |
| Housing depth | 65.5 mm |
| Storage temperature | -40 ... 75 В°C (-40 ... 167 В°F) |
| Signal output | relay, 1 NO |
| Ambient light limit | 80000 Lux |
| Control elements | sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch |
| Switching voltage | max. 250 V AC/DC |
| Switching current | max. 2 A |
| Effective detection range | 0 ... 17 m |
Comments
No comments yet