Pepperl+Fuchs S1SD-1AI-1U.2

Isolating Amplifier
Pepperl+Fuchs S1SD-1AI-1U.2
199.29
One click request
Power dissipation0.6 W
Degree of protectionIP20
Connectionterminals 3-, 4+
Labelingspace for labeling at the front
Connection sidecontrol side
Power consumption0.8 W
Settling time7 ms , 100 micro/s
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Degree of protectionIEC 60529:2001
Frequency range0 ... 100 Hz , 0 ... 8 kHz
Optional accessoriespower feed module S1SD-2PF
Power Bus POWERBUS-SETL5.***
Power Bus POWERBUS-SETH5.***
cover for DIN mounting rail POWERBUS-COV.250
end cap POWERBUS-CAP
Rated voltage16.8 ... 31.2 V DC
CertificateDEMKO 16 ATEX 1750X
Massapprox. 70 g
IECEx approvalIECEx UL 16.0116X
Dimensions6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Connectionscrew terminals
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Accuracymax. 0.1 % of full-scale value
UL approvalE106378
Control elementsDIP-switch
potentiometer
ConnectionPower Bus or terminals 1-, 2+
Transmission rangelinearity range:
unipolar -1 ... 110 %
bipolar -110 ... 110 %
Connection sidefield side
Configurationvia DIP switches
via potentiometer
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Core cross-section0.5 ... 2.5 mm2 (20 ... 14 AWG)
Influence of ambient temperature< 100 ppm/K of full-scale value
Signal typeAnalog input
Ripple 10 mV eff
in international format without spaces
All fields are required