Pepperl+Fuchs S1SD-1AI-2U
Isolating Amplifier/Splitter
- 1-channel signal conditioner
- 24 V DC supply
- Input 2-wire transmitters
- Input current and voltage sources
- Dual output 0/4 mA ... 20 mA, 0/1 V ... 5 V or 0/2 V ... 10 V
- Signal splitter (1 input and 2 outputs)
- Accuracy 0.1 %
- Connection via screw terminals
Item Number:
S1SD-1AI-2U
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Power consumption | 1.4 W |
| IECEx approval | IECEx UL 16.0116X |
| Input signal | 0/4 ... 20 mA |
| UL approval | E106378 |
| Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
| Optional accessories | power feed module S1SD-2PF Power Bus POWERBUS-SETL5.*** Power Bus POWERBUS-SETH5.*** cover for DIN mounting rail POWERBUS-COV.250 end cap POWERBUS-CAP |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Degree of protection | IP20 |
| Connection side | control side |
| Open circuit voltage/short-circuit current | 22 V / 35 mA |
| Connection | Power Bus or terminals 1-, 2+ |
| Rated voltage | 16.8 ... 31.2 V DC |
| Frequency range | 0 ... 100 Hz |
| Connection | terminals 5+, 6- |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Influence of ambient temperature | < 100 ppm/K of full-scale value |
| Degree of protection | IEC 60529:2001 |
| Transmission range | linearity range: -1 ... 110 % |
| Accuracy | max. 0.1 % of full-scale value |
| Certificate | DEMKO 16 ATEX 1750X |
| Available voltage | 16 V at 20 mA |
| Input resistance | 25 andOmega; |
| Connection | screw terminals |
| Labeling | space for labeling at the front |
| Signal type | Analog input |
| Mass | approx. 70 g |
| Rise time/fall time | 3.5 ms |
| Core cross-section | 0.5 ... 2.5 mm2 (20 ... 14 AWG) |
| Dimensions | 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1 |
| Power dissipation | 0.8 W |
| Connection side | field side |
| Ripple | 10 mV eff |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Comments
No comments yet