Pepperl+Fuchs S1SD-1FI-1R
Rotation Speed Monitor

Pepperl+Fuchs S1SD-1FI-1R
  • 1-channel signal conditioner
  • 24 V DC supply
  • Input for 2- or 3-wire sensors
  • Input frequency 10 mHz ... 50 kHz
  • Relay contact output
  • Start-up override and restart inhibit
  • Configurable by DIP switches and software
  • Connection via screw terminals
Item Number: S1SD-1FI-1R
233.75
-
+
Total price: 233.75
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Core cross-section0.5 ... 2.5 mm2 (20 ... 14 AWG)
Input/Other circuitssafe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Control elementsDIP-switch
Labelingspace for labeling at the front
Influence of ambient temperature< 100 ppm/K of the measured value
Connectionscrew terminals
Dimensions6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Minimum switch current2 mA / 24 V DC
Optional accessoriespower feed module S1SD-2PF
adapter with USB interface S-ADP-USB
Power Bus POWERBUS-SETL5.***
Power Bus POWERBUS-SETH5.***
cover for DIN mounting rail POWERBUS-COV.250
end cap POWERBUS-CAP
splitter VAZ-CHAIN-BU/BN70MM/1,0-25
Connectionterminals 3, 4:
Programming interfaceprogramming socket
Accuracymax. 0.1 % of the measurement value
Contact loading253 V AC/2 A/cos andphi; > 0.7; 126.5 V AC/4 A/cos andphi; > 0.7; 30 V DC/2 A resistive load
ConnectionPower Bus or terminals 1-, 2+
Connection sidecontrol side
Outputsignal, relay
Protection against electrical shockEN 61010-1:2010
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical life107 switching cycles
Configurationvia DIP switches
via software
Energized/De-energized delay 20 ms / 20 ms
Degree of protectionIP20
Massapprox. 60 g
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Degree of protectionIEC 60529:2001
Display elementsLEDs
Signal typeDigital Input
Power dissipation0.6 W
Measuring time 100 ms
Rated voltage16.8 ... 31.2 V DC
Power consumption1.1 W
Output/power supplysafe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Frequency range0.01 ... 50000 Hz
Connection sidefield side

Comments

No comments yet

Write a comment