Pepperl+Fuchs SC-GPCS-UNI16-PF
Termination Board
- System board for Honeywell Experion PKS, Series C
- For 16-/32-channel cards CC-TDIL01/11, CC-TDOB01/11, CC-TAIX01/11 and CC-TAOX01/11
- For 16 modules
- Recommended modules: HiC2821 (DI), HiC2871 (DO), HiC2025 (AI), HiC2031 (AO)
- Recommended system cable: CAB-HON-**-S37C32-MX-01000
- 24 V DC supply
- Hazardous area: pluggable screw terminals, blue
- Non-hazardous area: Sub-D connector (male), 37-pin
Item Number:
SC-GPCS-UNI16-PF
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Datasheet
- Alternative numbers
- Comments
| Mass | approx. 825 g |
| Degree of protection | IP20 |
| Degree of protection | IEC 60529:2001 |
| Fusing | 4 A |
| Voltage drop | 0.9 V , voltage drop across the series diode on the termination board must be considered |
| Display elements | LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED LED Fault (fault indication), green LED |
| Certificate | DEMKO 18 ATEX 2116 X |
| Ripple | 10 % |
| Core cross-section | screw terminals: 0.25 ... 2.5 mm2 (24 ... 12 AWG) |
| Reverse polarity protection | yes |
| EU-Type Examination Certificate | CESI 06 ATEX 022 |
| Material | housing: polycarbonate |
| Dimensions | 273 x 155 x 153 mm (L x W x H) , height including module assembly |
| Designation | provided accessory: Label Carrier HiALC-HI*TF-SET-1** optional accessories: - system cable CAB-HON-**-S37C32-MX-01000 - HART communication board HiATB01-HART-2X16 - HART multiplexer master HiDMux2700 - HART connection cable HiACA-UNI-FLK34-*M* |
| Output type | volt-free contact |
| Connection | terminal block TB3 (1-, 2+; 3-, 4+) |
| Contact loading | 30 V DC , 1 A |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Electromagnetic compatibility | NE 21:2017 For further information see system description. |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Supply | Redundancy available. The supply for the isolators is decoupled, monitored and fused. |
| Power dissipation | 500 mW , without modules |
| Nominal voltage | 24 V DC , in consideration of rated voltage of used isolators |
Comments
No comments yet