Pepperl+Fuchs SLA29/105/106
Safety thru-beam sensor
- Sensing range up to 30 m
- Self-monitoring (type 4 according to IEC/EN 61496-1)
- Extended temperature range up to -35 В°C with heated front panel
- Red transmission light
- Integrated alignment aid
- Clearly visible LED functional display and pre-fault indicator on the receiver
- Operation of control units of Series SB4
- Overview
- Comments
| Effective detection range | 0.2 ... 30 m |
| Relative humidity | max. 95 %, not condensing |
| Degree of protection | IP67 according to EN 60529 |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Ambient temperature | -35 ... 55 В°C (-31 ... 131 В°F) with heated optical face, fixed voltage 24 V DC В± 20 %/50 mA |
| CE conformity | CE |
| Threshold detection range | 40 m |
| Mission Time (TM) | 20 a |
| Product standard | EN 61496-1 ; IEC 61496-2 |
| Connection | M12 connector, 5 pin |
| Light type | modulated visible red light |
| Functional safety | ISO 13849-1 |
| Receiver | SLA29-R/105/106 |
| Performance level (PL) | PL e |
| Approvals | TГњV; cULus (in operation with contol unit SafeBox SB4) |
| Safety Integrity Level (SIL) | SIL 3 |
| Mass | per device 70 g |
| Angle of divergence | < 5 В° |
| Light source | LED |
| Operating voltage | Power supply via control unit |
| Alignment aid | LED red in receiver |
| Category | Cat. 4 |
| Type | 4 |
| Function indicator | LED yellow: 1. LED lit constantly: signal > 2 x switching point (function reserve) 2. LED flashes: signal between 1 x switching point and 2 x switching point 3. LED off: signal < switching point |
| Storage temperature | -20 ... 70 В°C (-4 ... 158 В°F) |
| Target size | static: 30 mm dynamic: 40 mm (at v = 1.6 m/s of the obstacle) |
| PFHd | 0.44 E-9 |
| Emitter | SLA29-T/105/106 |
| Operation indicator | LED green |
Comments
No comments yet