Pepperl+Fuchs SLCS30-/35
Safety light curtain
We ship to United States of America!
- Resolution 30 mm (hand protection)
- Protection field height up to 2400 mm
- Self-monitoring (type 4 according to IEC/EN 61496-1)
- SIL3 (IEC 61508)
- Sensing range up to 20 m
- Degree of protection IP67
- Temperature range -35 ... 60ΠΒ°C (-31 ... 140 ΠΒ°F)
- Slim design, mounting on three sides
Item Number:
SLCS30-/35
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
| Mission Time (TM) | 20 a |
| Input current | 5 mA |
| Degree of protection | IP67 , For indoor use only |
| Function indicator | Green: OSSD ON , Red: OSSD OFF |
| Optical resolution | 30 mm |
| No-load supply current | Transmitter unit: 150 mA Receiver: 150 mA (without outputs) |
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 |
| Angle of divergence | < 5 ΠΒ° |
| Input type | Transmitter unit, mode A/B |
| Input format | Break contact |
| Function | Beam Code A: open or 0 V Beam Code B: 24 V DC, 5 mA |
| Operating mode | Startup/restart disable, deactivateable |
| Signal output | PNP-semiconductor, short-circuit protected, 0.1A |
| Response time | see Table 1, max. 48 ms |
| Type | 4 |
| Category | Cat. 4 |
| Protection field height | see Table 1, max. 2400 mm |
| Effective detection range | 5 ... 20 m |
| UL File Number | E215245 |
| Performance level (PL) | PL e |
| Light type | modulated infrared light , 850 nm |
| Ambient light limit | Not sensitive to ambient light in accordance with IEC 61496-2 |
| Input current | 5 mA |
| CE conformity | CE |
| Protection class | III , IEC 61140 |
| Relative humidity | max. 95 %, not condensing |
| Power consumption | Transmitter unit: 5 W Receiver: 15 W |
| Switching current | ON: max. 0.1 A; OFF: < 5 ΠΒ΅A |
| Operation indicator | green: Power on |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Housing length L | see table 2 |
| Light source | IRED |
| Signal output | PNP semiconductor , monitored for short and cross circuits |
| Operating voltage | 24 V DC (-20%, +30%) ; Power supply with safe isolation: 24 V DC |
| Safety Integrity Level (SIL) | SIL 3 |
| Switching voltage | 24 V DC |
| Input type | Transmitter unit test |
| Storage temperature | -35 ... 70 ΠΒ°C (-31 ... 158 ΠΒ°F) |
| Switching voltage | ON: UB - 2 V; OFF: < 1 V |
| Input format | Break contact |
| Output type | Receiver unit OSSD |
| Input type | Receiver unit, mode A/B (see transmitter unit, mode A/B) |
| Switching voltage | 24 V DC |
| Mass | see table 2 |
| TΠΡV approval | TΠΡV |
| Input type | Receiver unit relay monitor |
| Input format | Break contact |
| Status indicator | Transmitter unit: LED yellow: Mode, test or error Receiver: LED yellow: Start readiness, function reserve or error |
| Product standard | EN 61496-1 ; IEC 61496-2 |
| Output type | Receiver signal output start readiness |
| Ambient temperature | -35 ... 60 ΠΒ°C (-31 ... 140 ΠΒ°F) |
| Input current | 5 mA |
| Input type | Receiver unit, start release |
| Connection | Transmitter unit: 4-pin, M12 x 1 connector Receiver: 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm2 Max. cable length 50 m |
| UL approval | cULus Listed |
| PFHd | Depending on the protection field height; see Manual |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
Buy Pepperl+Fuchs SLCS30-/35 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is a world-known industrial automation supplier. We have a lot of products in stock. We deliver to any country in the world. We will give you a valuable offer. We always reply to queries and give feedback. We understand your needs and constantly strive to work more efficiently to solve them.
Comments
No comments yet