Pepperl+Fuchs SLPCM10-3-L/31

Safety light grid with integrated control unit

The Product is out of Production!

Contact the manager for more information.

Specification:

• Sensing range up to 10 m
• 3-radial design
• Beam spacing 400 mm
• Self-monitoring (type 4 according to IEC/EN 61496-1)
• Red transmission light
• Usable with or without start/restart disable
• Sequential and parallel muting in various operating modes
• Emergency muting for the correction of the material jam
• Integrated relay monitor
• 7-segment diagnostic display
• Integrated function display
• Pre-fault indication
• OSSD outputs as semiconductor or relay outputs

Datasheet:

• ReceiverSLPCM10-3-R-L/31
• Switching voltage: 20 ... 60 V DC, 12 ... 25 V AC rms
• Signal output: 1 PNP each, max. 300 mA for startup readiness, OSSD on, OSSD off, muting lamp, signals in parallel in the lamp socket
• Light type: modulated visible red light
• PFHd: 3.54 E-9
• B10d: see instruction manuals
• Diagnostics indicator: 7-segment display
• Switching current: 0.01 ... 2 A
• Function indicator: LED red: per receiver channel; off: interruption; flashes: receiver; continuously on: reception with sufficient stability control
• on the front plate
• LED red: OSSD off
• LED green: OSSD on
• LED yellow: types of muting operation
• Category: Cat. 4
• Connection: M16 cable gland, terminal compartment with cage terminals, M12 connector for transmitters, muting lamp, etc., muting sensors, lamp socket for muting lamp, etc.
• Pre-fault indicator: LED red next to receiver flashes
• Number of beams: 3
• Angle of divergence: < 5 В°
• Light source: LED
• Operating voltage: 24 V DC -15% / +25% , galvanically isolated
• Degree of protection: IP65
• Function input: Relay monitor, start release, muting sensors (max. 4)
• Functional safety: ISO 13849-1
• Safety type according to IEC/EN 61496: 4
• Mission Time (TM): 20 a    
• Safety output: 2 relay outputs, force-guided NO-contact    
• Performance level (PL): PL e    
• Effective detection range: 0.2 ... 10 m    
• Beam spacing: 400 mm    
• Operating mode: Start/restart disable, relay monitor, muting operating modes    
• Target size: static: 32 mm
• dynamic: 50 mm (at v = 1.6 m/s of the obstacle)    
• Emitter: SLP10-3-T    
• Product standard: EN 61496-1 ; IEC 61496-2    
• Marking    CE