Pepperl+Fuchs SU18-16/40a/110/115a/126a
Fiber optic sensor
- Basic line for DIN rail installation
- Sleek design
- 3 response times selectable
- High switching frequency
- Self diagnosis function
Item Number:
SU18-16/40a/110/115a/126a
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Switching frequency | Standard mode: 3 kHz , High speed mode: 6 kHz , High resolution: 250 Hz |
| Housing width | 9 mm |
| Signal output | 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected |
| Housing depth | 62.3 mm |
| Switching voltage | max. 30 V DC |
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Ripple | 10 % |
| Switching type | light/dark on, switchable |
| Degree of protection | IP50 |
| Operating voltage | 10 ... 30 V DC |
| Ambient temperature | -10 ... 55 В°C (14 ... 131 В°F) |
| Control elements | Potentiometer for setting sensitivity slide switch 2 positions: light/dark switching slide switch 3 positions: timer function - timer off, on delay 40 ms, off-delay 40 ms slide switch 3 positions: operating mode - normal, high speed , high resolution |
| Light type | modulated visible red light , 660 nm |
| Sensor range | up to 150 mm (KLR-C02-2,2-2,0-K146) |
| Function indicator | LED yellow: static illumination switching state, flashes when falling short of the stability control |
| Detection range | up to 450 mm (KLE-C01-2,2-2,0-K116) |
| Housing height | 34.5 mm |
| Ambient light limit | 10000 Lux |
| Pre-fault indication output | 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected |
| Voltage drop | 2 V DC at 100 mA ; 0.7 V at 10 mA |
| Storage temperature | -20 ... 70 В°C (-4 ... 158 В°F) |
| Connection | 200 mm, PVC cable with M8 connector, 4-pin |
| Response time | Standard mode: 160 micro/s , High speed mode: 80 micro/s , High resolution: 2 ms |
| Switching current | max. 100 mA , resistive load |
| Mission Time (TM) | 20 a |
| Mass | 45 g |
| Diagnostic Coverage (DC) | 0 % |
| Light source | LED |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| MTTFd | 690 a |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| No-load supply current | 30 mA |
| Repeat accuracy | 0.5 % of adjusted sensor range |
Comments
No comments yet