Pepperl+Fuchs SU18-40a/110/115/126a Fiber optic sensor

Pepperl+Fuchs SU18-40a/110/115/126a
Item Number: SU18-40a/110/115/126a
  • Basic line for DIN rail installation
  • Sleek design
  • 3 response times selectable
  • High switching frequency
  • Self diagnosis function
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
MTTFd690 a
Sensor rangeup to 150 mm (KLR-C02-2,2-2,0-K146)
Repeat accuracy 0.5 % of adjusted sensor range
Ambient light limit10000 Lux
Housing width9 mm
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated 36 V
Control elementsTeach-In key
slide switch 2 positions: light/dark switching
slide switch 3 positions: timer function - timer off, on delay 40 ms, off-delay 40 ms
slide switch 3 positions: operating mode - normal, high speed , high resolution
Ambient temperature-10 ... 55 В°C (14 ... 131 В°F)
Housing depth62.3 mm
Light sourceLED
Switching currentmax. 100 mA , resistive load
Switching voltagemax. 30 V DC
Light typemodulated visible red light , 660 nm
Pre-fault indication output1 push-pull (4 in 1) output NPN/PNP , short-circuit protected
Connection2 m PVC cable, 4 x 0,14 mm2
Signal output1 push-pull (4 in 1) output NPN/PNP , short-circuit protected
Storage temperature-20 ... 70 В°C (-4 ... 158 В°F)
Mass45 g
Degree of protectionIP50
Diagnostic Coverage (DC)0 %
Detection rangeup to 450 mm (KLE-C01-2,2-2,0-K116)
Switching typelight/dark on, switchable
Operating voltage10 ... 30 V DC
Response timeStandard mode: 160 micro/s , High speed mode: 80 micro/s , High resolution: 1 ms
Operation indicatorLED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Housing height34.5 mm
Switching frequencyStandard mode: 3 kHz , High speed mode: 6 kHz , High resolution: 500 Hz
No-load supply current 30 mA
Mission Time (TM)20 a
Ripple10 %
Function indicatorLED yellow: static illumination switching state, flashes when falling short of the stability control
Voltage drop 2 V DC at 100 mA ; 0.7 V at 10 mA

Comments

No comments yet

Write a comment

in international format without spaces
All fields are required