Pepperl+Fuchs SU19/110/115a/126a
Fiber optic sensor
- Classic line with display
- AGC (Automatic Gain Control) for faster teach-in
- Gang mounting for easy wiring
- Transparency recognition
- 30 Вµs High Speed Mode
- Master module
Item Number:
SU19/110/115a/126a
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Switching voltage | max. 30 V DC |
| Ambient temperature | -10 ... 55 В°C (14 ... 131 В°F) |
| Diagnostics indicator | 7-segment display |
| Function indicator | LED yellow: static illumination switching state, flashes when falling short of the stability control |
| Switching current | max. 100 mA , resistive load |
| Gang mounting | maximum 20 units |
| Connection | 200 mm, PVC cable with M8 connector, 4-pin |
| Degree of protection | IP50 |
| Diagnostic Coverage (DC) | 0 % |
| Operating voltage | 10 ... 30 V DC |
| Mass | 45 g |
| MTTFd | 500 a |
| Storage temperature | -20 ... 70 В°C (-4 ... 158 В°F) |
| Detection range | up to 450 mm (KLE-C01-2,2-2,0-K116) |
| Switching frequency | High speed mode: 16 kHz , Standard mode: 3 kHz , High resolution: 250 Hz ~ 3 kHz (selection by the sensor), Automatic: 250 Hz , Glass mode: 250 Hz |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Pre-fault indication output | 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected |
| Ambient light limit | 10000 Lux |
| Response time | High speed mode: 30 micro/s , Standard mode: 160 micro/s , High resolution: 2 ms , Automatic: 160 micro/s ~ 2 ms (choice by the sensor), Glass mode: 2 ms |
| Housing height | 34.5 mm |
| Housing width | 9 mm |
| Sensor range | up to 150 mm (KLR-C02-2,2-2,0-K146) |
| Switching type | light/dark on selectable programmable |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| Light type | modulated visible red light , 660 nm |
| Signal output | 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected |
| Repeat accuracy | 0.5 % of adjusted sensor range |
| Light source | LED |
| Mission Time (TM) | 20 a |
| Operation indicator | Power on: static illumination , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| No-load supply current | 30 mA |
| Ripple | 10 % |
| Control elements | Button (Mode) for menu choice ; Button (Set) for Teach-In ; Button (Up/Down) for fine adjusting and parameterization |
| Housing depth | 62.3 mm |
| Voltage drop | 2 V DC at 100 mA ; 0.7 V at 10 mA |
| Timer function | ON-delay, OFF-delay, one shot, pulse extension ; adjustable 0 ... 999 ms in 1 ms increments |
Comments
No comments yet