Pepperl+Fuchs UB1000-18GM75-I-V15
Ultrasonic sensor
- Analog output 4 mA ... 20 mA
- Measuring window adjustable
- Selectable sound lobe width
- Program input
- Synchronization options
- Deactivation option
- Temperature compensation
- Very small unusable area
Item Number:
UB1000-18GM75-I-V15
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Beam width | wide |
Response delay | approx. 125 ms |
Degree of protection | IP67 |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Temperature influence | В± 1.5 % of full-scale value |
Dead band | 0 ... 70 mm |
Resolution | 0.35 mm |
Input type | 1 program input lower evaluation limit A1: -UB ... +1 V, upper evaluation limit A2: +4 V ... +UB input impedance: > 4.7 kandOmega;, pulse duration: 1 s |
Output | evaluation limit A1: 90 mm evaluation limit A2: 1000 mm output function: rising ramp |
LED yellow | solid yellow: object in the evaluation range yellow, flashing: program function, object detected |
Load impedance | 0 ... 300 Ohm |
Standard target plate | 100 mm x 100 mm |
Deviation of the characteristic curve | В± 1 % of full-scale value |
Mass | 60 g |
Transducer frequency | approx. 255 kHz |
Sensing range | 70 ... 1000 mm |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
No-load supply current | 45 mA |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
LED red | solid red: Error red, flashing: program function, object not detected |
Repeat accuracy | В± 0.1 % of full-scale value |
CCC approval | CCC approval / marking not required for products rated 36 V |
Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
Adjustment range | 90 ... 1000 mm |
Synchronization | 1 synchronous connection, bi-directional 0-level: -UB...+1 V 1-level: +4 V...+UB input impedance: > 12 kandOmega; synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
Output type | 1 analog output 4 ... 20 mA |
Connection type | Connector plug M12 x 1 , 5-pin |
People also buy
Comments
No comments yet