Pepperl+Fuchs UB2000-30GM-E5-V15 Ultrasonic sensor
Item Number: UB2000-30GM-E5-V15
- Switch output
- 5 different output functions can be set
- Program input
- Synchronization options
- Deactivation option
- Temperature compensation
- Insensitive to compressed air
- Overview
- Datasheet
- Alternative numbers
- Comments
Operating voltage10 ... 30 V DC , ripple 10 %SS
| Range hysteresis | 1 % of the set operating distance |
| Mass | 140 g |
| UL approval | cULus Listed, General Purpose |
| Repeat accuracy | 0.5 % of switching point |
| Connection type | Connector M12 x 1 , 5-pin |
| Switching frequency | 3.3 Hz |
| No-load supply current | 50 mA |
| Response delay | approx. 150 ms |
| Input type | 1 program input, operating range 1: -UB ... +1 V, operating range 2: +4 V ... +UB input impedance: > 4.7 kandOmega;; program pulse: 1 s |
| LED yellow | solid: switching state switch output flashing: program function |
| CSA approval | cCSAus Listed, General Purpose |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
| EAC conformity | TR CU 020/2011 |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Transducer frequency | approx. 180 kHz |
| Adjustment range | 120 ... 2000 mm |
| LED red | normal operation: ""fault"" program function: no object detected |
| Output type | 1 switch output PNP , Normally open/closed , programmable |
| Standard target plate | 100 mm x 100 mm |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Degree of protection | IP65 |
| Dead band | 0 ... 80 mm |
| Temperature influence | < 2 % of far switch point |
| Voltage drop | 2.5 V |
| LED green | solid: Power-on flashing: program function object detected |
| Sensing range | 80 ... 2000 mm |
| CCC approval | CCC approval / marking not required for products rated 36 V |
Comments
No comments yet