Pepperl+Fuchs UB2000-F42S-E4-V15
Ultrasonic sensor
- Switch output
- Extremely small unusable area
- TEACH-IN
- Interference suppression (adjustable divergence of sound cone in close range)
- Temperature compensation
- Synchronization options
- NO/NC selectable
Item Number:
UB2000-F42S-E4-V15
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Output type | 1 switching output E4, NPN, NO/NC, programmable |
Standard target plate | 100 mm x 100 mm |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
LED yellow | solid: switching state switch output flashing: program function |
Connection type | Connector M12 x 1 , 5-pin |
Adjustment range | 90 ... 2000 mm |
Response delay | approx. 150 ms |
Degree of protection | IP54 |
Range hysteresis | 1 % of the set operating distance |
Dead band | 0 ... 60 mm |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Voltage drop | 2.5 V |
Mass | 140 g |
Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
Sensing range | 60 ... 2000 mm |
Switching frequency | 2.7 Hz |
UL approval | cULus Listed, General Purpose |
No-load supply current | 50 mA |
Repeat accuracy | 0.5 % of switching point |
LED green | solid green: Power on |
Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
Transducer frequency | approx. 175 kHz |
Temperature influence | В± 1 % of full-scale value |
Rated operating current | 200 mA , short-circuit/overload protected |
LED red | normal operation: ""fault"" program function: no object detected |
CSA approval | cCSAus Listed, General Purpose |
Default setting | Switch point A1: 90 mm , Switch point A2: 2000 mm , wide sound lobe |
CCC approval | CCC approval / marking not required for products rated 36 V |
People also buy
Comments
No comments yet