Pepperl+Fuchs UB2000-F54-I-V15 Ultrasonic sensor
Item Number: UB2000-F54-I-V15
- Analog output 4 mA ... 20 mA
- Measuring window adjustable
- Program input
- Synchronization options
- Deactivation option
- Temperature compensation
- Overview
- Datasheet
- Alternative numbers
- Comments
| Deviation of the characteristic curve | В± 1 % of full-scale value |
| LED yellow | solid yellow: object in the evaluation range yellow, flashing: program function, object detected |
| Dead band | 0 ... 80 mm |
| Connection type | Connector M12 x 1 , 5-pin |
| Repeat accuracy | В± 0.1 % of full-scale value |
| Input type | 1 program input lower evaluation limit A1: -UB ... +1 V, upper evaluation limit A2: +4 V ... +UB input impedance: > 4.7 kandOmega;, pulse duration: 1 s |
| LED red | flashing: normal mode: error Program function: no object detected permanently: Program mode, object uncertain |
| Default setting | evaluation limit A1: 100 mm evaluation limit A2: 2000 mm |
| Sensing range | 80 ... 2000 mm |
| CSA approval | cCSAus Listed, General Purpose |
| Temperature influence | В± 1.5 % of full-scale value |
| LED green | solid green: monitoring system green flashing: program function |
| Synchronization | 1 synchronous input 0-level: -UB...+1 V 1-level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: 0,1 ... 28 ms |
| UL approval | cULus Listed, General Purpose |
| Resolution | 0.5 mm |
| Load impedance | 0 ... 300 Ohm |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Response delay | 150 ms |
| Mass | 100 g |
| Standard target plate | 100 mm x 100 mm |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| No-load supply current | 55 mA |
| Output type | 1 analog output 4 ... 20 mA |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Degree of protection | IP65 |
| Transducer frequency | approx. 175 kHz |
| Adjustment range | 100 ... 2000 mm |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
Comments
No comments yet