Pepperl+Fuchs UB250-F12P-EP-V15 Ultrasonic sensor

Pepperl+Fuchs UB250-F12P-EP-V15
Item Number: UB250-F12P-EP-V15
  • Switching point adjustment via potentiometer
  • Selectable sound lobe width
  • Synchronization options
  • Very small unusable area
  • Push-pull output
  • Temperature compensation
386.40
Quantity
-
+
Total price: 386.40
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
No-load supply current 25 mA
Standard target plate100 mm x 100 mm
Rated operating current200 mA , short-circuit/overload protected
Dead band0 ... 20 mm
Mass60 g
LED redsolid: stop plate switch point adjuster
flashing: error
Voltage drop 3 V
Default settingSwitching point: 250 mm
output behavior: NO contact
Sensing range20 ... 250 mm
Temperature influenceВ± 1.5 % of full-scale value
UL approvalcULus Listed, General Purpose
Output typePush-pull output, short-circuit protected, reverse polarity protected
Operating voltage10 ... 30 V DC , ripple 10 %SS
LED greenOperating display
Range hysteresis1 % of the set operating distance
LED yellowswitch output
Repeat accuracy 1 %
Synchronization1 synchronous connection, bi-directional
0-level: -UB...+1 V
1-level: +4 V...+UB
input impedance: > 12 kandOmega;
synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms
Ambient temperature-15 ... 70 В°C (5 ... 158 В°F)
Transducer frequencyapprox. 400 kHz
Adjustment range25 ... 250 mm
Switching frequency20 Hz
Response delayapprox. 20 ms
CSA approvalcCSAus Listed, General Purpose
Input type1 input for sound lobe adjustment
small sound beam: -UB ... +1 V
wide sound beam: +4 V ... +UB or open input
input impedance: > 10 kandOmega;
switching delay: 1 s
Degree of protectionIP54
Connection typeConnector M12 x 1 , 5-pin

Comments

No comments yet

Write a comment