Pepperl+Fuchs UB3000-F42-UK-V95
Ultrasonic sensor
We ship to United States of America!
- Relay output for high power
- Extremely small unusable area
- TEACH-IN
- Interference suppression (adjustable divergence of sound cone in close range)
- Temperature compensation
- NO/NC selectable
Item Number:
UB3000-F42-UK-V95
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
- Overview +
- Comments +
| Sensing range | 200 ... 3000 mm |
| Adjustment range | 240 ... 3000 mm |
| Response delay | approx. 325 ms |
| Fusing | 3 A Slow-blow fuse in accordance with IEC 60127-2 Sheet 5 required. Recommendation: after a short circuit, check that the device is functioning correctly. |
| Rated operating current | 3 A |
| Output type | 1 relay output |
| EAC conformity | TR CU 004/2011 TR CU 020/2011 |
| LED red | normal operation: ""fault"" program function: no object detected |
| Switching frequency | 1.5 Hz |
| Standard target plate | 100 mm x 100 mm |
| Connection | 5-pin V95 connector (7/8""-16 UN 2A) |
| Range hysteresis | 1 % of the set operating distance |
| Dead band | 0 ... 200 mm |
| Storage temperature | -40 ... 85 ?°C (-40 ... 185 ?°F) |
| LED green | solid green: Power on |
| Degree of protection | IP65 |
| Ambient temperature | -25 ... 70 ?°C (-13 ... 158 ?°F) |
| Transducer frequency | approx. 85 kHz |
| No-load supply current | 60 mA |
| Temperature influence | ?± 1 % of full-scale value |
| Operating voltage | 22 ... 253 V AC/DC |
| LED yellow | solid: switching state switch output flashing: program function |
| Repeat accuracy | 0.5 % of switching point |
| Mass | 260 g |
Buy Pepperl+Fuchs UB3000-F42-UK-V95 with the best possible price and delivery terms on eltra-trade.com
eltra-trade.com provides top-notch industrial control components. Our online catalog features a diverse selection of products, all available for fast delivery. Benefit from our competitive prices and excellent customer support. Trust us to meet your automation equipment requirements.
Comments
No comments yet