Pepperl+Fuchs UB400-F42-UK-V95
Ultrasonic sensor
- Relay output for high power
- Extremely small unusable area
- TEACH-IN
- Interference suppression (adjustable divergence of sound cone in close range)
- Temperature compensation
- NO/NC selectable
Item Number:
UB400-F42-UK-V95
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| No-load supply current | 60 mA |
| Standard target plate | 100 mm x 100 mm |
| Operating voltage | 22 ... 253 V AC/DC |
| Degree of protection | IP65 |
| Temperature influence | В± 1 % of full-scale value |
| Sensing range | 40 ... 400 mm |
| Repeat accuracy | 0.5 % of switching point |
| Transducer frequency | approx. 390 kHz |
| Output type | 1 relay output |
| Dead band | 0 ... 40 mm |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Rated operating current | 3 A |
| Range hysteresis | 1 % of the set operating distance |
| LED red | normal operation: ""fault"" program function: no object detected |
| LED green | solid green: Power on |
| Adjustment range | 50 ... 400 mm |
| Response delay | approx. 50 ms |
| LED yellow | solid: switching state switch output flashing: program function |
| Connection | 5-pin V95 connector (7/8""-16 UN 2A) |
| Fusing | 3 A Slow-blow fuse in accordance with IEC 60127-2 Sheet 5 required. Recommendation: after a short circuit, check that the device is functioning correctly. |
| Mass | 260 g |
| EAC conformity | TR CU 004/2011 TR CU 020/2011 |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Switching frequency | 8 Hz |
Comments
No comments yet