Pepperl+Fuchs UB4000-F42-E5-V15
Ultrasonic sensor
- Switch output
- Extremely small unusable area
- TEACH-IN
- Interference suppression (adjustable divergence of sound cone in close range)
- Temperature compensation
- Synchronization options
- NO/NC selectable
Item Number:
UB4000-F42-E5-V15
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Output type | 1 switching output E5, PNP NO/NC, programmable |
| Connection type | Connector M12 x 1 , 5-pin |
| Adjustment range | 240 ... 4000 mm |
| Standard target plate | 100 mm x 100 mm |
| CSA approval | cCSAus Listed, General Purpose |
| LED green | solid green: Power on |
| LED yellow | solid: switching state switch output flashing: program function |
| Temperature influence | В± 1 % of full-scale value |
| Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
| Sensing range | 200 ... 4000 mm |
| Default setting | Switch point A1: 240 mm , Switch point A2: 4000 mm , wide sound lobe |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| Repeat accuracy | 0.5 % of switching point |
| Voltage drop | 2.5 V |
| UL approval | cULus Listed, General Purpose |
| LED red | normal operation: ""fault"" program function: no object detected |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Dead band | 0 ... 200 mm |
| Response delay | approx. 325 ms |
| Transducer frequency | approx. 85 kHz |
| Degree of protection | IP54 |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Range hysteresis | 1 % of the set operating distance |
| No-load supply current | 60 mA |
| Switching frequency | 1.2 Hz |
| Mass | 150 g |
Comments
No comments yet