Pepperl+Fuchs UB4000-F42-U-V15 Ultrasonic sensor
Item Number: UB4000-F42-U-V15
- Analog output 0 ... 10 V
- Extremely small unusable area
- TEACH-IN
- Interference suppression (adjustable divergence of sound cone in close range)
- Temperature compensation
- Synchronization options
- Mode of operation adjustable
- Overview
- Datasheet
- Alternative numbers
- Comments
| Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| LED red | normal operation: ""fault"" program function: no object detected |
| LED green | solid green: Power on |
| Mass | 150 g |
| Response delay | approx. 325 ms |
| Dead band | 0 ... 200 mm |
| Deviation of the characteristic curve | В± 1 % of full-scale value |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Transducer frequency | approx. 85 kHz |
| UL approval | cULus Listed, General Purpose |
| Sensing range | 200 ... 4000 mm |
| Repeat accuracy | В± 0.1 % of full-scale value |
| Adjustment range | 240 ... 4000 mm |
| Operating voltage | 17 ... 30 V DC , ripple 10 %SS |
| Load impedance | > 1 kOhm |
| Resolution | 0.7 mm |
| Output type | 1 analog output 0 ... 10 V |
| Standard target plate | 100 mm x 100 mm |
| Default setting | evaluation limit A1: 240 mm , evaluation limit A2: 4000 mm , wide sound lobe |
| No-load supply current | 60 mA |
| CSA approval | cCSAus Listed, General Purpose |
| Temperature influence | В± 1 % of full-scale value |
| Connection type | Connector M12 x 1 , 5-pin |
| LED yellow | solid: object in evaluation range flashing: program function |
| Degree of protection | IP54 |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Comments
No comments yet