Pepperl+Fuchs UB500-18GM75-E5-V15-ET-Y216689
Ultrasonic sensor
- Switch output
- 5 different output functions can be set
- Selectable sound lobe width
- Program input
- Synchronization options
- Deactivation option
- Temperature compensation
- Very small unusable area
Item Number:
UB500-18GM75-E5-V15-ET-Y216689
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Response delay | approx. 50 ms |
Synchronization | 1 synchronous connection, bi-directional 0-level: -UB...+1 V 1-level: +4 V...+UB input impedance: > 12 kandOmega; synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
LED yellow | indication of the switching state flashing: program function object detected |
Connection type | Connector M12 x 1 , 5-pin |
Repeat accuracy | 1 % |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Standard target plate | 100 mm x 100 mm |
Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
Range hysteresis | 1 % of the set operating distance |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Transducer frequency | approx. 380 kHz |
Rated operating current | 200 mA , short-circuit/overload protected |
CCC approval | CCC approval / marking not required for products rated 36 V |
Dead band | 0 ... 30 mm |
Temperature influence | В± 1.5 % of full-scale value |
CSA approval | cCSAus Listed, General Purpose |
Adjustment range | 50 ... 500 mm |
Mass | 60 g |
Sensing range | 30 ... 500 mm |
Switching frequency | max. 8 Hz |
Degree of protection | IP65 |
No-load supply current | 50 mA |
LED red | ""Error"", object uncertain in program function: No object detected |
Default setting | switch output at a distance of 180 mm , NC contact narrow sound lobe |
Input type | 1 program input, operating range 1: -UB ... +1 V, operating range 2: +4 V ... +UB input impedance: > 4.7 kandOmega;; program pulse: 1 s |
Output type | 1 switching output E5, PNP NO/NC, programmable |
Voltage drop | 3 V |
UL approval | cULus Listed, General Purpose |
People also buy
Comments
No comments yet