Pepperl+Fuchs UB500-18GM75-E6-V15 Ultrasonic sensor
Item Number: UB500-18GM75-E6-V15
- 2 switch outputs
- 3 different output functions can be set
- Selectable sound lobe width
- Program input
- Temperature compensation
- Very small unusable area
- Overview
- Datasheet
- Alternative numbers
- Comments
| LED yellow | indication of the switching state flashing: program function object detected |
| Output type | 2 switch outputs PNP, NO/NC, programmable |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Temperature influence | В± 1.5 % of full-scale value |
| Repeat accuracy | 1 % |
| Range hysteresis | 1 % of the set operating distance |
| Switching frequency | max. 8 Hz |
| No-load supply current | 50 mA |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Standard target plate | 100 mm x 100 mm |
| UL approval | cULus Listed, General Purpose |
| Dead band | 0 ... 30 mm |
| Voltage drop | 3 V |
| Adjustment range | 50 ... 500 mm |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Input type | 1 program input, operating range 1: -UB ... +1 V, operating range 2: +4 V ... +UB input impedance: > 4.7 kandOmega;; program pulse: 1 s |
| Degree of protection | IP67 |
| Connection type | Connector M12 x 1 , 5-pin |
| Rated operating current | 2 x 100 mA , short-circuit/overload protected |
| Sensing range | 30 ... 500 mm |
| LED red | ""Error"", object uncertain in program function: No object detected |
| Response delay | approx. 50 ms |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| Mass | 60 g |
| Transducer frequency | approx. 380 kHz |
Comments
No comments yet