Pepperl+Fuchs UB500-F42-I-V15
Ultrasonic sensor
- Analog output 4 mA ... 20 mA
- Extremely small unusable area
- TEACH-IN
- Interference suppression (adjustable divergence of sound cone in close range)
- Temperature compensation
- Synchronization options
- Mode of operation adjustable
Item Number:
UB500-F42-I-V15
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Output type | 1 analog output 4 ... 20 mA |
Load impedance | 0 ... 300 Ohm |
Sensing range | 30 ... 500 mm |
LED yellow | solid: object in evaluation range flashing: program function |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Mass | 140 g |
LED green | solid green: Power on |
No-load supply current | 50 mA |
CCC approval | CCC approval / marking not required for products rated 36 V |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Transducer frequency | approx. 390 kHz |
LED red | normal operation: ""fault"" program function: no object detected |
Resolution | 0.2 mm for max. detection range |
Connection type | Connector M12 x 1 , 5-pin |
Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
Dead band | 0 ... 30 mm |
Repeat accuracy | В± 0.1 % of full-scale value |
Temperature influence | В± 1 % of full-scale value |
CSA approval | cCSAus Listed, General Purpose |
UL approval | cULus Listed, General Purpose |
Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
Degree of protection | IP54 |
Deviation of the characteristic curve | В± 1 % of full-scale value |
Adjustment range | 50 ... 500 mm |
Standard target plate | 100 mm x 100 mm |
Response delay | approx. 50 ms |
Default setting | evaluation limit A1: 50 mm , evaluation limit A2: 500 mm , wide sound lobe |
People also buy
Comments
No comments yet