Pepperl+Fuchs UB500-F42S-E6-V15 Ultrasonic sensor
Item Number: UB500-F42S-E6-V15
- 2 independent switch outputs
- Extremely small unusable area
- TEACH-IN
- Interference suppression (adjustable divergence of sound cone in close range)
- Temperature compensation
- Synchronization options
- NO/NC selectable
- Overview
- Datasheet
- Alternative numbers
- Comments
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| Dead band | 0 ... 30 mm |
| Transducer frequency | approx. 390 kHz |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Standard target plate | 100 mm x 100 mm |
| Output type | 2 switch outputs PNP, NO/NC selectable |
| LED yellow 1 | solid: switching state switch output 1 flashing: program function |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Mass | 140 g |
| Connection type | Connector M12 x 1 , 5-pin |
| LED red | normal operation: ""fault"" program function: no object detected |
| Adjustment range | 50 ... 500 mm |
| No-load supply current | 50 mA |
| Range hysteresis | 1 % of the set operating distance |
| Degree of protection | IP54 |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Sensing range | 30 ... 500 mm |
| Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
| Default setting | Switch point A1: 50 mm , Switch point A2: 500 mm , wide sound lobe |
| Repeat accuracy | 0.5 % of switching point |
| Voltage drop | 2.5 V |
| Response delay | approx. 50 ms |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| Temperature influence | В± 1 % of full-scale value |
| LED yellow 2 | solid: switching state switch output 2 flashing: program function |
| Switching frequency | 8 Hz |
| LED green | solid green: Power on |
Comments
No comments yet