Pepperl+Fuchs UB500-F54-E4-V15
Ultrasonic sensor
- Switch output
- 5 different output functions can be set
- Program input
- Synchronization options
- Deactivation option
- Temperature compensation
Item Number:
UB500-F54-E4-V15
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Voltage drop | 3 V |
| Repeat accuracy | 1 % of full-scale value |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| CSA approval | cCSAus Listed, General Purpose |
| Degree of protection | IP65 |
| LED yellow | indication of the switching state flashing: program function object detected |
| Input type | 1 program input, switching point A1: -UB ... +1 V, switching point A2: +4 V ... +UB input impedance: > 4.7 kandOmega;, program pulse: 1 s |
| UL approval | cULus Listed, General Purpose |
| Sensing range | 30 ... 500 mm |
| Standard target plate | 100 mm x 100 mm |
| Connection type | Connector M12 x 1 , 5-pin |
| Range hysteresis | 1 % of the set operating distance |
| Dead band | 0 ... 30 mm |
| Synchronization | 1 synchronous input 0 level: UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: 0.1 ... 8 ms |
| Rated operating current | 200 mA , short-circuit/overload protected |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Response delay | 50 ms |
| Transducer frequency | approx. 380 kHz |
| Switching frequency | max. 10 Hz |
| Temperature influence | В± 1.5 % of full-scale value |
| LED green | solid green: monitoring system green flashing: program function |
| Adjustment range | 50 ... 500 mm |
| No-load supply current | 55 mA |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| LED red | flashing: normal mode: error Program function: no object detected permanently: Program mode, object uncertain |
| Output type | 1 switch output E4, NPN, NO/NC |
| Mass | 100 g |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
Comments
No comments yet