Pepperl+Fuchs UB6000-F42-E6-V15 Ultrasonic sensor


Item Number: UB6000-F42-E6-V15
- 2 independent switch outputs
- Extremely small unusable area
- TEACH-IN
- Interference suppression (adjustable divergence of sound cone in close range)
- Temperature compensation
- Synchronization options
- NO/NC selectable
- Overview
- Datasheet
- Alternative numbers
- Comments
Temperature influence | В± 1 % of full-scale value |
Connection type | Connector M12 x 1 , 5-pin |
CSA approval | cCSAus Listed, General Purpose |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
LED yellow 2 | solid: switching state switch output 2 flashing: program function |
Dead band | 0 ... 350 mm |
UL approval | cULus Listed, General Purpose |
Voltage drop | 2.5 V |
Response delay | approx. 650 ms |
Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
CCC approval | CCC approval / marking not required for products rated 36 V |
Sensing range | 350 ... 6000 mm |
Rated operating current | 200 mA , short-circuit/overload protected |
Default setting | Switch point A1: 400 mm , Switch point A2: 6000 mm , wide sound lobe |
LED yellow 1 | solid: switching state switch output 1 flashing: program function |
LED red | normal operation: ""fault"" program function: no object detected |
LED green | solid green: Power on |
Output type | 2 switch outputs PNP, NO/NC selectable |
Standard target plate | 100 mm x 100 mm |
Transducer frequency | approx. 65 kHz |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Adjustment range | 400 ... 6000 mm |
Repeat accuracy | 0.5 % of switching point |
Switching frequency | 0.6 Hz |
No-load supply current | 60 mA |
Mass | 210 g |
Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
Degree of protection | IP54 |
Range hysteresis | 1 % of the set operating distance |
People also buy
Comments
No comments yet