Pepperl+Fuchs UB6000-F42-I-V1-Y220443
Ultrasonic sensor
- Analog output 4 mA ... 20 mA
- Extremely small unusable area
- Temperature compensation
- Synchronization options
- Overview
- Comments
| No-load supply current | 60 mA |
| Resolution | 0.7 mm |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Load impedance | 0 ... 300 Ohm |
| Transducer frequency | approx. 65 kHz |
| Measurement range | 400 ... 6000 mm |
| Repeat accuracy | В± 0.1 % of full-scale value |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Response delay | approx. 650 ms |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| Output type | 1 analog output 4 ... 20 mA |
| Dead band | 0 ... 350 mm |
| LED yellow | object in evaluation range |
| LED red | error |
| Connection type | Connector M12 x 1 , 4-pin |
| Deviation of the characteristic curve | В± 1 % of full-scale value |
| Standard target plate | 100 mm x 100 mm |
| UL approval | cULus Listed, General Purpose |
| Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
| CSA approval | cCSAus Listed, General Purpose |
| Connection | 4-pin, M12 x 1 connector |
| Temperature influence | В± 1 % of full-scale value |
| LED green | Power on |
| Sensing range | 350 ... 6000 mm |
| Mass | 330 g |
| Degree of protection | IP67 |
Comments
No comments yet