Pepperl+Fuchs UB800-18GM40-E5-V1-Y70113183 Ultrasonic sensor
Item Number: UB800-18GM40-E5-V1-Y70113183
- Short design, 40 mm
- Function indicators visible from all directions
- Switch output
- 5 different output functions can be set
- Program input
- Temperature compensation
- Custom configuration
- Overview
- Datasheet
- Alternative numbers
- Comments
| LED yellow | indication of the switching state flashing: program function object detected |
| Standard target plate | 100 mm x 100 mm |
| Range hysteresis | 1 % of the set operating distance |
| UL approval | cULus Listed, General Purpose |
| Degree of protection | IP67 |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| Temperature influence | В± 1.5 % of full-scale value |
| Voltage drop | ≤ 3 V |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| No-load supply current | ≤ 20 mA |
| Transducer frequency | approx. 255 kHz |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Switching frequency | ≤ 4 Hz |
| Sensing range | 50 ... 800 mm |
| Dead band | 0 ... 50 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| LED red | solid red: Error red, flashing: program function, object not detected |
| Repeat accuracy | ≤ 1 % |
| Default setting | Switching point: 400 mm , Normally closed (NC) |
| Connection type | Connector plug M12 x 1 , 4-pin |
| LED green | Power on |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Adjustment range | 70 ... 800 mm |
| Response delay | approx. 100 ms |
| EAC conformity | TR CU 020/2011 |
| Input type | 1 program input operating distance 1: -UB ... +1 V, operating distance 2: +6 V ... +UB input impedance: > 4,7 kΩ program pulse: ≥ 1 s |
| Mass | 25 g |
| Output type | 1 switching output E5, PNP NO/NC, programmable |
Comments
No comments yet