Pepperl+Fuchs UB800-F12P-EP-V15
Ultrasonic sensor
- Switching point adjustment via potentiometer
- Selectable sound lobe width
- Synchronization options
- Very small unusable area
- Push-pull output
- Temperature compensation
Item Number:
UB800-F12P-EP-V15
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Standard target plate | 100 mm x 100 mm |
Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
Mass | 60 g |
LED red | solid: stop plate switch point adjuster flashing: error |
Rated operating current | 200 mA , short-circuit/overload protected |
Dead band | 0 ... 30 mm |
LED yellow | switch output |
LED green | Operating display |
Response delay | approx. 100 ms |
Synchronization | 1 synchronous connection, bi-directional 0-level: -UB...+1 V 1-level: +4 V...+UB input impedance: > 12 kandOmega; synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
Connection type | Connector M12 x 1 , 5-pin |
Output type | Push-pull output, short-circuit protected, reverse polarity protected |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Range hysteresis | 1 % of the set operating distance |
No-load supply current | 25 mA |
Voltage drop | 3 V |
CCC approval | CCC approval / marking not required for products rated 36 V |
Sensing range | 30 ... 800 mm |
Repeat accuracy | 1 % |
CSA approval | cCSAus Listed, General Purpose |
Switching frequency | max. 4 Hz |
Temperature influence | В± 1.5 % of full-scale value |
UL approval | cULus Listed, General Purpose |
Input type | 1 input for sound lobe adjustment small sound beam: -UB ... +1 V wide sound beam: +4 V ... +UB or open input input impedance: > 10 kandOmega; switching delay: 1 s |
Degree of protection | IP54 |
Transducer frequency | approx. 310 kHz |
Ambient temperature | -15 ... 70 В°C (5 ... 158 В°F) |
Adjustment range | 50 ... 800 mm |
People also buy
Comments
No comments yet