Pepperl+Fuchs UBE800-F77-SE0-V31
Through-beam ultrasonic barrier
- Miniature design
- Highly visible LEDs for Power ON and switching state
- High switching frequency
- Program input
- Degree of protection IP67
Item Number:
UBE800-F77-SE0-V31
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
UL approval | cULus Listed, General Purpose |
Installation position | any position |
Degree of protection | IP67 |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Sensing range | 0 ... 800 mm emitter/receiver spacing |
LED green | Power on ( emitter ) |
Level | low level : 0 ... 0.7 V ; high level : > 14 V |
Tightening torque, fastening screws | max. 0.2 Nm |
Standard target plate | see table |
Switching frequency | 100 Hz |
Rated operating voltage | 24 V DC |
Voltage drop | ≤ 2 V |
Operating voltage | 20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 80 % |
Mass | Per 10 g |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Shock resistance | 30 g , 11 ms period |
Transducer frequency | approx. 300 kHz |
Pulse length | ≥ 3 s |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Connection type | M8 x 1 connector , 4-pin |
Off-state current | ≤ 0.01 mA |
Switch-on delay | ≤ 5 ms |
Permissible cable length | max. 300 m |
Input impedance | 16 kΩ |
Rated operating current | 200 mA , short-circuit/overload protected |
LED yellow | switching state ( receiver ) |
Time delay before availability | ≤ 150 ms |
Output type | 1 switch output E0, NPN, NO |
Input type | 1 program input (receiver) |
No-load supply current | ≤ 20 mA |
Vibration resistance | 10 ... 55 Hz , Amplitude В± 1 mm |
People also buy
Comments
No comments yet