Pepperl+Fuchs UBE800-F77-SE2-V31
Through-beam ultrasonic barrier
- Miniature design
- Highly visible LEDs for Power ON and switching state
- High switching frequency
- Program input
- Degree of protection IP67
Item Number:
UBE800-F77-SE2-V31
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Operating voltage | 20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 80 % |
| LED green | Power on ( emitter ) |
| No-load supply current | 20 mA |
| Shock resistance | 30 g , 11 ms period |
| Switch-on delay | 5 ms |
| Voltage drop | 2 V |
| Rated operating voltage | 24 V DC |
| Standard target plate | see table |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Switching frequency | 100 Hz |
| Degree of protection | IP67 |
| Sensing range | 0 ... 800 mm emitter/receiver spacing |
| Rated operating current | 200 mA , short-circuit/overload protected |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| LED yellow | switching state ( receiver ) |
| Pulse length | 3 s |
| Input type | 1 program input (receiver) |
| Transducer frequency | approx. 300 kHz |
| Level | low level : 0 ... 0.7 V ; high level : > 14 V |
| Output type | 1 switch output PNP, NO |
| UL approval | cULus Listed, General Purpose |
| Mass | Per 10 g |
| Time delay before availability | 150 ms |
| Permissible cable length | max. 300 m |
| Connection type | M8 x 1 connector , 4-pin |
| Installation position | any position |
| Tightening torque, fastening screws | max. 0.2 Nm |
| Input impedance | 16 kandOmega; |
| Off-state current | 0.01 mA |
| Vibration resistance | 10 ... 55 Hz , Amplitude В± 1 mm |
Comments
No comments yet