Pepperl+Fuchs UC1000-18GS-IUEP-IO-V15
Ultrasonic sensor
We ship to United States of America!
- IO-Link Interface for process data, parameterization and diagnosis
- Programmable via DTM with PACTWARE
- Programmable via IrDA (infrared interface)
- Selectable sound lobe width
- Synchronization options
- Enhanced temperature compensation adjustable, stable measuring values already 2 min after switching on
- Push-pull output
- Analog output
Item Number:
UC1000-18GS-IUEP-IO-V15
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
- Overview +
- Comments +
Single head system | ||
Sensing range | 70 ... 1000 mm | |
Adjustment range | 90 ... 1000 mm | |
Dead band | 0 ... 70 mm | |
Standard target plate | 100 mm x 100 mm | |
Transducer frequency | approx. 255 kHz | |
Response delay | minimum : 28 ms factory setting: 56 ms | |
Sensor cycle time | ?‰§ 14 ms (factory setting) ; programmable to 60 s | |
Temperature influence | with temperature compensation: ?‰¦ ?± 0.75% of the end value 10 min after switching on the sensor (factory setting) with enhanced temperature compensation: ?‰¦ ?± 0.75% of the end value 2 min after switching on the sensor without temperature compensation: 0.17 %/K | |
Non-volatile memory | EEPROM | |
Write cycles | 300000 | |
LED green | solid: power on flashing: standby mode or IO-Link communication | |
LED yellow | solid: object in evaluation range flashing: switch point programming, object detected | |
LED red | solid: error flashing: switch point programming, object not detected | |
Operating voltage | 10 ... 30 V DC , ripple 10 %SS | |
No-load supply current | ?‰¦ 60 mA | |
Power consumption | ?‰¦ 1000 mW | |
Time delay before availability | ?‰¦ 300 ms | |
Interface type | IO-Link (via C/Q = Pin 4) | |
IO-Link revision | 1.1 | |
Device profile | Smart Sensor Profile 2 | |
Process data width | 32 bit | |
Device ID | 0x300604 (3147268) | |
Transfer rate | COM2 (38.4 kBit/s) | |
Min. cycle time | 3 ms | |
SIO mode support | yes | |
Compatible master port type | Class A Class B (use 3-pole adapter or 3-wire cable) | |
Interface type | IrDA (infrared interface) | |
Mode | point-to-point connection | |
Transfer rate | 115.2 kBit/s | |
Maximum communication distance | 5 cm | |
Input/output type | 1 synchronization connection, bidirectional | |
0 Level | 0 ... 1 V | |
1 Level | 2.5 V ... UB | |
Input impedance | > 22 kΩ | |
Output rated operating current | current source < 2.5 mA | |
Pulse length | ?‰§ 1 ms with external control, low active | |
Synchronization frequency | ||
Common mode operation | ?‰¦ 71 Hz | |
Multiplex operation | ?‰¦ 71 Hz / n , n = number of sensors , n ?‰¦ 10 | |
Output type | 1 push-pull output , short-circuit protected , reverse polarity protected | |
Rated operating current | 100 mA , short-circuit/overload protected | |
Switching frequency | factory setting: 10 Hz programmable to 23 Hz | |
Voltage drop | ?‰¦ 2.5 V | |
Repeat accuracy | ?‰¦ ?± 0.1 % of full-scale value | |
Range hysteresis | 1 % of the adjusted operating range (default settings), programmable , min. 1 mm | |
Off-state current | ?‰¦ 100 ?µA | |
Output type | 1 analog output 0 (4) ... 20 mA or 1 analog output 0 ... 10 V | |
Resolution | current output: evaluation range [mm]/3200 but ?‰§ 0.35 mm voltage output: evaluation range [mm]/4000 but ?‰§ 0.35 mm | |
Deviation of the characteristic curve | ?‰¦ ?± 1 % of full-scale value | |
Repeat accuracy | ?‰¦ ?± 0.1 % of full-scale value | |
Load resistor | current output: ?‰¦ 500 Ω voltage output: ?‰§ 1000 Ω | |
Standard conformity | ||
Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 IEC 61131-9:2013 | |
UL approval | cULus Listed, Class 2 Power Source | |
CCC approval | CCC approval / marking not required for products rated ?‰¦36 V | |
Ambient temperature | -25 ... 70 ?°C (-13 ... 158 ?°F) | |
Storage temperature | -40 ... 85 ?°C (-40 ... 185 ?°F) | |
Connection type | Connector plug M12 x 1 , 5-pin | |
Housing diameter | 18 mm | |
Degree of protection | IP67 | |
Material | ||
Housing | stainless steel (1.4305 / AISI 303)>BR>PA, PC, POM and PBT plastic parts | |
Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
Installation position | any position | |
Mass | 45 g | |
Tightening torque, fastening screws | max. 30 Nm | |
Output 1 | near switch point: 90 mm far switch point: 1000 mm Output mode: Window mode output behavior: NO contact | |
Output 2 | near limit: 90 mm far limit: 1000 mm Output mode: rising ramp output behavior: Current output 4 mA ... 20 mA | |
Beam width | wide | |
ECLASS 13.0 | 27272803 | |
ECLASS 12.0 | 27272803 | |
ECLASS 11.0 | 27272803 | |
ECLASS 10.0.1 | 27272803 | |
ECLASS 9.0 | 27272803 | |
ECLASS 8.0 | 27272803 | |
ECLASS 5.1 | 27272803 | |
ETIM 9.0 | EC001849 | |
ETIM 8.0 | EC001849 | |
ETIM 7.0 | EC001849 | |
ETIM 6.0 | EC001849 | |
ETIM 5.0 | EC001849 | |
UNSPSC 12.1 | 41111960 |
Buy Pepperl+Fuchs UC1000-18GS-IUEP-IO-V15 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. offers premium industrial control products. Our vast inventory and express delivery options ensure you receive your order quickly. We prioritize quality and customer satisfaction. Contact us today to learn more about our offerings and how we can assist your business.
People also buy
Comments
No comments yet