Pepperl+Fuchs UC10000-F260-IE8R2-Y250792 Ultrasonic sensor
Item Number: UC10000-F260-IE8R2-Y250792
- Large sensing range
- Adjustable Bracket
- Programmable by means of Interface (see accessories) and SONPROG
- 1 analog output, 0-20 mA current source
- 2 switch outputs
- Synchronization options
- Temperature compensation
- Overview
- Datasheet
- Alternative numbers
- Comments
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| LED yellow | solid: switching state switch output flashing: misadjustment |
| Standard target plate | 100 mm x 100 mm |
| Repeat accuracy | В± 15 mm |
| Load resistor | 300 andOmega; |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| No-load supply current | 75 mA |
| Linearity error | 1.5 % |
| Operating current | 300 mA , short-circuit/overload protected |
| CSA approval | cCSAus Listed, General Purpose |
| Output type | 2 switch outputs PNP, NO |
| Degree of protection | IP65 |
| Sensing range | 800 ... 10000 mm |
| Transducer frequency | approx. 60 kHz |
| Connection type | screw terminals , PG 13.5 cable gland |
| Dead band | 0 ... 800 mm |
| Mass | 1800 g |
| Adjustment range | 800 ... 10000 mm |
| Input/output type | 1 synchronization connection, bidirectional |
| UL approval | cULus Listed, General Purpose |
| Default setting | 800 ... 10000 mm |
| Output type | 1 current output 0 ... 20 mA rising ramp |
| Voltage drop | 3 V |
| Operating voltage | 15 ... 30 V (including ripple) In supply voltage interval 15 ... 20 V sensitivity reduced to 20% ... 0% |
| CCC approval | CCC approval / marking not required for products rated 36 V |
Comments
No comments yet