Pepperl+Fuchs UC2000-30GM-IU-V1-HB
Ultrasonic sensor
- Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000
- Analog current and voltage output
- Adjustable acoustic power and sensitivity
- Temperature compensation
- UL and CSA NRTL certified for hazardous area installation
Item Number:
UC2000-30GM-IU-V1-HB
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Temperature influence | 2 % from full-scale value (with temperature compensation) 0.2 %/K (without temperature compensation) |
Load impedance | current output: 500 Ohm voltage output: 1000 Ohm |
LED yellow 1 | solid: object in evaluation range flashing: program function |
LED yellow 2 | solid: object in detection range flashing: program function |
UL approval | all Div 2 hazardous areas |
Interface type | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit |
Sensing range | 80 ... 2000 mm |
Note | Individual components: UC-2000-30GM-IUR2-V15; V1-G-2M-PVC; M-106 impact adapter; ADAPT-ALUM*-M30X1/2"" NPT/HB**** |
Power consumption | 900 mW |
Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
Dead band | 0 ... 80 mm |
Transducer frequency | approx. 180 kHz |
Output type | 1 current output 4 ... 20 mA 1 voltage output 0 ... 10 V |
Connection type | Cable connector , M12 x 1 , 5-pin , 4-wire |
Deviation of the characteristic curve | 0.2 % of full-scale value |
CCC approval | CCC approval / marking not required for products rated 36 V |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Resolution | evaluation range [mm]/4000, but 0.35 mm |
LED green | solid: Power-on flashing: Standby mode or program function object detected |
Response delay | 65 ms minimum 195 ms factory setting |
Repeat accuracy | 0.1 % of full-scale value |
LED red | solid: temperature/program plug not connected flashing: fault or program function object not detected |
Degree of protection | IP65 |
Temperature/TEACH-IN connector | Temperature compensation , Evaluation range programming , output function setting |
Standard target plate | 100 mm x 100 mm |
CSA approval | NRTL certified all Div 2, Class II Div 1, Class III Div 1 hazardous areas |
Adjustment range | 120 ... 2000 mm |
Standards | EN 60947-5-2 |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
People also buy
Comments
No comments yet